Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

[an error occurred while processing this directive]

Pluggable Transceivers Supported on EX4300 Switches

Optional uplink modules for EX4300 switches support SFP, SFP+, and QSFP+ transceivers. This topic describes the optical interfaces supported for those transceivers. It also lists the copper interfaces supported for the SFP transceivers.

Note: We recommend that you use only optical transceivers and optical connectors purchased from Juniper Networks with your Juniper Networks device.

Caution: If you are having a problem running a Juniper Networks device that is using a third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC) can help you diagnose the source of the problem. Your JTAC engineer might recommend that you check the third-party optic or cable and potentially replace it with an equivalent Juniper Networks optic or cable that is qualified for the device.

The Gigabit Ethernet SFP, SFP+, and QSFP+ transceivers installed in EX4300 switches support digital optical monitoring (DOM): You can view the diagnostic details for these transceivers by issuing the operational mode CLI command show interfaces diagnostics optics.

Note: The transceivers support DOM even if they are installed in the SFP+ uplink module ports or QSFP+ ports configured as Virtual Chassis ports (VCPs).

The tables in this topic describe the optical interface support over single-mode fiber-optic (SMF) and multimode fiber-optic (MMF) cables for SFP, SFP+, and QSFP+ transceivers and the copper interfaces supported for the SFP transceivers:

  • Table 48—Optical interface support and copper interface support for Gigabit Ethernet SFP transceivers.
  • Table 49—Optical interface support for Fast Ethernet SFP transceivers.

    Note: Only the SFP network ports on 32-port EX4300 switches support Fast Ethernet SFP transceivers. The built-in uplink ports or the uplink module ports do not support Fast Ethernet SFP transceivers.

  • Table 50—Optical interface support for SFP+ transceivers.
  • Table 51—Optical interface support for QSFP+ transceivers.

Table 48: Optical interface Support and Copper Interface Support for Gigabit Ethernet SFP Transceivers in EX4300 Switches

Ethernet Standard

Specification

Value

1000BASE-T

Model number

EX-SFP-1GE-T

Rate

10/100/1000 Mbps

Connector type

RJ-45

Transmitter wavelength

Minimum launch power

Maximum launch power

Minimum receiver sensitivity

Maximum input power

Core/Cladding size

Modal bandwidth

Distance

100 m (328 ft)

Software required

  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-32F-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

Support for Virtual Chassis configuration

No

1000BASE-SX

Model number

EX-SFP-1GE-SX

Rate

1000 Mbps

Connector type

LC

Transmitter wavelength

850 nm

Minimum launch power

–9.5 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

0 dBm

Fiber type

MMF

Core size

62.5 µm

62.5 µm

50 µm

50 µm

Modal bandwidth

160 MHz/km

200 MHz/km

400 MHz/km

500 MHz/km

Distance

220 m (721 ft)

275 m (902 ft)

500 m (1640 ft)

550 m (1804 ft)

DOM support

Available

Support for Virtual Chassis configuration

No

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

1000BASE-LX

Model number

EX-SFP-1GE-LX

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–9.5 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–25 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Support for Virtual Chassis configuration

No

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

1000BASE-BX-U

Model number

EX-SFP-GE10KT13R14

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1490 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–30 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Support for Virtual Chassis configuration

No

Software required

Junos OS for EX Series switches, Release 14.1X53-D26 or later

1000BASE-BX-D

Model number

EX-SFP-GE10KT14R13

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1490 nm

Receiver wavelength

1310 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–30 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Support for Virtual Chassis configuration

No

Software required

Junos OS for EX Series switches, Release 14.1X53-D26 or later

1000BASE-BX-U

Model number

EX-SFP-GE10KT13R15

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1550 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Support for Virtual Chassis configuration

No

Software required

Junos OS for EX Series switches, Release 14.1X53-D26 or later

1000BASE-BX-D

Model number

EX-SFP-GE10KT15R13

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1550 nm

Receiver wavelength

1310 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Support for Virtual Chassis configuration

No

Software required

Junos OS for EX Series switches, Release 14.1X53-D26 or later

1000BASE-LH (or 1000BASE-ZX)

Model number

EX-SFP-1GE-LH

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1550 nm

Minimum launch power

–2 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–25 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

70 km (43.5 miles)

DOM support

Available

Support for Virtual Chassis configuration

No

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

Table 49: Optical interface Support for Fast Ethernet SFP Transceivers in EX4300 Switches

Ethernet Standard

Specification

Value

100BASE-FX

Note: Only the SFP network ports on 32-port EX4300 switches support Fast Ethernet SFP transceivers.
The built-in uplink ports or the uplink module ports do not support Fast Ethernet SFP transceivers.

Model number

EX-SFP-1FE-FX

Rate

100 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–20 dBm

Maximum launch power

–14 dBm

Minimum receiver sensitivity

–32.5 dBm

Maximum input power

–8 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

Fiber grade

FDDI/OM1

Modal bandwidth

500 MHz/km

Distance

2 km (1.2 miles)

DOM support

Not available

Support for Virtual Chassis configuration

No

Software required

  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-32F-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

Table 50: Optical interface Support for SFP+ Transceivers in EX4300 Switches

Ethernet Standard

Specification

Value

10GBASE-USR

Model number

EX-SFP-10GE-USR

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

850 nm

Minimum launch power

–7.3 dBm

Maximum launch power

–1.3 dBm

Minimum receiver sensitivity

–11.1 dBm

Maximum input power

–1.0 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

50/125 µm

50/125 µm

Fiber grade

OM1

OM3

OM3

Modal bandwidth

200 MHz/km

500 MHz/km

1500 MHz/km

Distance

10 m (32.8 ft)

30 m (98.4 ft)

100 m (328 ft)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

10GBASE-SR

Model number

EX-SFP-10GE-SR

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

850 nm

Minimum launch power

–7.3 dBm

Maximum launch power

–1 dBm

Minimum receiver sensitivity

–9.9 dBm

Maximum input power

–1 dBm

Fiber type

MMF

Core/Cladding size

62.5/125
 µm

62.5/125
 µm

50/125
 µm

50/125
 µm

50/125
 µm

Fiber grade

FDDI

OM1

OM2

OM3

Modal bandwidth

160
 MHz/km

200
 MHz/km

400
 MHz/km

500
 MHz/km

1500
 MHz/km

Distance

26 m (85 ft)

33 m (108 ft)

66 m (216 ft)

82 m (269 ft)

300 m (984 ft)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

10GBASE-LRM

Model number

EX-SFP-10GE-LRM

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–6.5 dBm

Maximum launch power

0.5 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

0.5 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

50/125 µm

50/125 µm

Fiber grade

FDDI/OM1

OM2

OM3

Modal bandwidth

500 MHz/km

500 MHz/km

500 
MHz/km

Distance

220 m (722 ft)

220 m (722 ft)

220 m (722 ft)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

10GBASE-LR

Model number

EX-SFP-10GE-LR

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–8.2 dBm

Maximum launch power

0.5 dBm

Minimum receiver sensitivity

–18 dBm

Maximum input power

0.5 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

10GBASE-ER

Model number

EX-SFP-10GE-ER

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1550 nm

Minimum launch power

–4.7 dBm

Maximum launch power

4 dBm

Minimum receiver sensitivity

–15.8 dBm

Maximum input power

–1 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

10GBASE-ZR

Model number

EX-SFP-10GE-ZR

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1550 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–20 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

Table 51: Optical interface Support for QSFP+ Transceivers in EX4300 Switches

Ethernet Standard

Specification

Value

40GBASE-SR4

Model number

QFX-QSFP-40G-SR4

Rate

40 Gbps

Connector type

12-ribbon multimode fiber crossover cable with female MTP connectors

Fiber count

12

Transmitter wavelength

850 nm

Minimum launch power

–7.6 dBm (per lane)

Maximum launch power

2.4 dBm (per lane)

Maximum receiver sensitivity

–5.4 dBm

Maximum input power

4 dBm

Fiber type

MMF

Core/Cladding size

50/125 µm

50/125 µm

Fiber grade

OM3

OM4

Modal bandwidth

2000 MHz/km

4700 MHz/km

Distance

100 m (328 ft)

150 m (492 ft)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

40GBASE-ESR4

Model number

QFX-QSFP-40G-ESR4

Rate

40 Gbps

Connector type

12-ribbon multimode fiber crossover cable with female MTP connectors

Fiber count

12

Transmitter wavelength

850 nm

Minimum launch power

–4.3 dBm (per lane)

Maximum launch power

–1 dBm (per lane)

Maximum receiver sensitivity

–7.5 dBm

Maximum input power

–1 dBm

Fiber type

MMF

Core/Cladding size

50/125 µm

50/125 µm

Fiber grade

OM3

OM4

Modal bandwidth

2000 MHz/km

4700 MHz/km

Distance

300 m (984 ft)

400 m (1312 ft)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

40GBASE-LX4

Model number

JNP-QSFP-40G-LX4

Rate

40 Gbps (10 Gbps per lane)

Connector type

Dual LC

Fiber count

Dual

Lane wavelength

Lane 0–1271 nm

Lane 1–1291 nm

Lane 2–1311 nm

Lane 3–1331 nm

Minimum launch power

-7.0 dBm (per lane)

Maximum launch power

4.3 dBm (per lane)

Maximum power draw

3.5 W

Fiber type

MMF

MMF

   

Core/Cladding size

50/125 µm

50/125 µm

   

Fiber grade

OM3

OM4

   

Modal bandwidth

2000 MHz/km

4700 MHz/km

   

Distance

100 m (328 ft)

150 m (328 ft)

   

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

Junos OS for EX Series switches, Release 14.1 or later

40GBASE-LR4

Model number

JNP-QSFP-40G-LR4

Rate

40 Gbps (10Gbps per Lane)

Connector type

LC

Fiber count

Dual

Lane wavelength

Lane 0—1264.5 nm through 1277.5 nm

Lane 1—1284.5 nm through 1297.5 nm

Lane 2—1304.5 nm through 1317.5 nm

Lane 3—1324.5 nm through 1337.5 nm

Minimum launch power

–7.0 dBm (per lane)

Maximum launch power

2.3 dBm (per lane)

Maximum receiver sensitivity

–11.5 dBm (per lane)

Maximum input power (per lane)

3.3 dBm (per lane)

Fiber type

SMF

Core/Cladding size

9/125 µm

Distance

10 km (6.2 miles)

DOM support

Available

Support for Virtual Chassis configuration

Yes

Software required

  • EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI, EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI switches—Junos OS for EX Series switches, Release 13.2X50-D10 or later
  • EX4300-32F switches—Junos OS for EX Series switches, Release 13.2X51-D15 or later
  • EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches—Junos OS for EX Series switches, Release 13.2X51-D26 or later

Related Documentation

Modified: 2015-06-23