[an error occurred while processing this directive]
Download This Guide
Mounting an EX3300 Switch on a Desk or Other Level Surface
You can mount an EX3300 switch on a desk or other level surface by using the four rubber feet that are shipped with the switch. The rubber feet stabilize the chassis.
Before mounting the switch on a desk or other level surface:
- Verify that the site meets the requirements described in Site Preparation Checklist for EX3300 Switches.
- Place the desk in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure.
- Read General Safety Guidelines and Warnings, with particular attention to Chassis Lifting Guidelines for EX3300 Switches.
Ensure that you have the following parts and tools available:
- 4 rubber feet to stabilize the chassis on the a desk or other level surface (provided in the accessory box in the switch carton)
To mount a switch on a desk or other level surface:
- Remove the switch from the shipping carton (see Unpacking an EX3300 Switch).
- Turn the chassis upside down on the desk or the level surface where you intend to mount the switch.
- Attach the rubber feet to the bottom of the chassis, as shown in Figure 28.
- Turn the chassis right side up on the desk or the level surface.
Figure 28: Attaching Rubber Feet to a Switch Chassis
Related Documentation
- Connecting AC Power to an EX3300 Switch
- Connecting DC Power to an EX3300 Switch
- Connecting and Configuring an EX Series Switch (CLI Procedure)
- Clearance Requirements for Airflow and Hardware Maintenance for EX3300 Switches
