Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

[an error occurred while processing this directive]

Pluggable Transceivers Supported on EX3300 Switches

Uplink ports on the front panel in EX3300 switches support SFP and SFP+ transceivers. This topic describes the optical interfaces supported for those transceivers.

Note: We recommend that you use only optical transceivers and optical connectors purchased from Juniper Networks with your Juniper Networks device.

Caution: If you are having a problem running a Juniper Networks device that is using a third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC) can help you diagnose the source of the problem. Your JTAC engineer might recommend that you check the third-party optic or cable and potentially replace it with an equivalent Juniper Networks optic or cable that is qualified for the device.

The Gigabit Ethernet SFP and SFP+ transceivers installed in EX3300 switches support digital optical monitoring (DOM): you can view the diagnostic details for these transceivers by issuing the operational mode CLI command show interfaces diagnostics optics.

Note: The transceivers support DOM even if they are installed in uplink ports configured as Virtual Chassis ports.

The tables in this topic describe the optical interface support over single-mode fiber-optic (SMF) and multimode fiber-optic (MMF) cables for SFP and SFP+ transceivers and over the copper interface for SFP transceivers:

  • Table 19—Optical interface support and copper interface support for Gigabit Ethernet SFP transceivers.
  • Table 20—Optical interface support for Gigabit Ethernet SFP+ transceivers.

Table 19: Optical interface Support and Copper Interface Support for Gigabit Ethernet SFP Transceivers in EX3300 Switches

Ethernet Standard

Specification

Value

1000BASE-T

Model number

EX-SFP-1GE-T

Rate

10/100/1000 Mbps

Connector type

RJ-45

Fiber count

Copper

Transmitter wavelength

Minimum launch power

Maximum launch power

Minimum receiver sensitivity

Maximum input power

Fiber type

Copper

Core/Cladding size

Modal bandwidth

Distance

100 m (328 ft)

DOM support

Not available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes, starting with Junos OS Release 12.3R3

1000BASE-SX

Model number

EX-SFP-1GE-SX

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

850 nm

Minimum launch power

–9.5 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

0 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

62.5/125 µm

50/125 µm

50/125 µm

Fiber grade

FDDI

OM1

OM2

Modal bandwidth

160 MHz/km

200 MHz/km

400 MHz/km

500 MHz/km

Distance

220 m (722 ft)

275 m (902 ft)

500 m (1640 ft)

550 m (1804 ft)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-1GE-LX

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–9.5 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–25 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-U

Model number

EX-SFP-GE10KT13R14

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1490 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–30 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-D

Model number

EX-SFP-GE10KT14R13

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1490 nm

Receiver wavelength

1310 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–30 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-U

Model number

EX-SFP-GE10KT13R15

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1550 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-D

Model number

EX-SFP-GE10KT15R13

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1550 nm

Receiver wavelength

1310 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-U

Model number

EX-SFP-GE40KT13R15

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1550 nm

Minimum launch power

–6.5 dBm

Maximum launch power

2 dBm

Minimum receiver sensitivity

–23 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-D

Model number

EX-SFP-GE40KT15R13

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1550 nm

Receiver wavelength

1310 nm

Minimum launch power

–6.5 dBm

Maximum launch power

2 dBm

Minimum receiver sensitivity

–23 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-1GE-LX40K

Rate

1000 Mbps

Connector type

LC

Fiber count

Double

Transmitter wavelength

1310 nm

Minimum launch power

–14 dBm

Maximum launch power

–8 dBm

Minimum receiver sensitivity

–45 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LH (or 1000BASE-ZX)

Model number

EX-SFP-1GE-LH

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1550 nm

Minimum launch power

–2 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–25 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

70 km (43.5 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

Table 20: Optical interface Support for SFP+ Gigabit Ethernet Transceivers in EX3300 Switches

Ethernet Standard

Specification

Value

10GbE USR

Note: This is not an IEEE standard.

Model number

EX-SFP-10GE-USR

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

850 nm

Minimum launch power

–7.3 dBm

Maximum launch power

–1.3 dBm

Minimum receiver sensitivity

–11.1 dBm

Maximum input power

–1.0 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

50/125 µm

50/125 µm

   

Fiber grade

OM1

OM3

OM3

   

Modal bandwidth

200 MHz/km

500 MHz/km

1500 MHz/km

   

Distance

10 m (32.8 ft)

30 m (98.4 ft)

100 m (328 ft)

   

DOM support

Available

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

10GBASE-SR

Model number

EX-SFP-10GE-SR

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

850 nm

Minimum launch power

–7.3 dBm

Maximum launch power

–1 dBm

Minimum receiver sensitivity

–9.9 dBm

Maximum input power

–1 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

62.5/125 µm

50/125 µm

50/125 µm

50/125 µm

50/125 µm

Fiber grade

FDDI

OM1

OM2

OM3

OM3 (OM4
compatible)

Modal bandwidth

160 MHz/km

200 MHz/km

400 MHz/km

500 MHz/km

1500 MHz/km

1500 MHz/km

Distance

26 m (85 ft)

33 m (108 ft)

66 m (216 ft)

82 m (269 ft)

300 m (984 ft)

300 m (984 ft)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

10GBASE-LRM

Model number

EX-SFP-10GE-LRM

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–6.5 dBm

Maximum launch power

0.5 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

0.5 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

50/125 µm

50/125 µm

   

Fiber grade

FDDI/OM1

OM2

OM3

   

Modal bandwidth

500 MHz/km

500 MHz/km

500 MHz/km

   

Distance

220 m (722 ft)

220 m (722 ft)

220 m (722 ft)

   

DOM support

Available

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

10GBASE-LR

Model number

EX-SFP-10GE-LR

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–8.2 dBm

Maximum launch power

0.5 dBm

Minimum receiver sensitivity

–18 dBm

Maximum input power

0.5 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

10GBASE-ER

Model number

EX-SFP-10GE-ER

Rate

10 Gbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1550 nm

Minimum launch power

–4.7 dBm

Maximum launch power

4 dBm

Minimum receiver sensitivity

–11.3 dBm

Maximum input power

–1 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

Related Documentation

Modified: 2015-06-23