Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

[an error occurred while processing this directive]

Front Panel of an EX3300 Switch

The front panel of an EX3300 switch consists of the following components:

  • Network ports:
    • Depending on the switch model, 24 or 48 10/100/1000BASE-T Gigabit Ethernet ports (ports labeled 0 through 23 or 0 through 47)
    • Power over Ethernet Plus (PoE+) available in all network ports in EX3300-24P and EX3300-48P models
    • Power over Ethernet Plus (PoE+) not available in any network port in EX3300-24T, EX3300-24T-DC, EX3300-48T, and EX3300-48T-BF models
  • Four built-in uplink ports:
    • The uplink ports support 1-gigabit small form-factor pluggable (SFP) transceivers, 10-gigabit small form-factor pluggable (SFP+) transceivers, or a combination of these transceivers.
    • Ports labeled 0 and 1 are, by default, configured as network ports. You can configure these ports as Virtual Chassis ports (VCPs).
    • Ports labeled 2 and 3 are, by default, configured as VCPs. You can configure these ports as network ports.
  • Network port and uplink port LEDs
  • Three chassis status LEDs
  • LCD panel and the LCD navigation buttons
  • Air intake or air exhaust, depending on the switch model—The intake or exhaust is located immediately below the top edge of the front panel.

Figure 1 shows the front panel of an EX3300 switch with 48 Gigabit Ethernet ports. Figure 2 shows the front panel of an EX3300 switch with 24 Gigabit Ethernet ports.

Figure 1: Front Panel of an EX3300 Switch with 48 Gigabit Ethernet Ports

Front Panel of
an EX3300 Switch with 48 Gigabit Ethernet Ports

Figure 2: Front Panel of an EX3300 Switch with 24 Gigabit Ethernet Ports

Front Panel of
an EX3300 Switch with 24 Gigabit Ethernet Ports

Related Documentation

Modified: 2015-06-23