[an error occurred while processing this directive]
Download This Guide
Related Documentation
- See EX2200 Switches Hardware Overview for port location.
- Connecting a Switch to a Network for Out-of-Band Management
Management Port Connector Pinout Information for an EX2200 Switch
The management port on an EX2200 switch uses an RJ-45 connector to connect to a management device for out-of-band management.
The port uses an autosensing RJ-45 connector to support a 10/100Base-T connection. Two LEDs on the port indicate link/activity on the port and the administrative status of the port. See Management Port LEDs in EX2200 Switches.
Table 16 provides the pinout information for the RJ-45 connector for the management port. An RJ-45 cable, with a connector attached, is supplied with the switch.
Table 16: Management Port Connector Pinout Information for EX2200 Switches
Pin | Signal | Description |
|---|---|---|
1 | TRP1+ | Transmit/receive data pair 1 |
2 | TRP1- | Transmit/receive data pair 1 |
3 | TRP2+ | Transmit/receive data pair 2 |
6 | TRP2- | Transmit/receive data pair 2 |
Related Documentation
- See EX2200 Switches Hardware Overview for port location.
- Connecting a Switch to a Network for Out-of-Band Management
