Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

[an error occurred while processing this directive]

Unpacking an EX2200 Switch

The EX2200 switches are shipped in a cardboard carton, secured with foam packing material. The carton also contains an accessory box.

Caution: EX2200 switches are maximally protected inside the shipping carton. Do not unpack the switches until you are ready to begin installation.

To unpack the switch:

  1. Move the shipping carton to a staging area as close to the installation site as possible, but where you have enough room to remove the system components.
  2. Position the carton so that the arrows are pointing up.
  3. Open the top flaps on the shipping carton.
  4. Remove the accessory box and verify the contents in it against the parts inventory on the label attached to the carton.
  5. Pull out the packing material holding the switch in place.
  6. Verify the chassis components received against the packing list included with the switch. An inventory of parts provided with the switch is provided in Parts Inventory (Packing List) for an EX2200 Switch.
  7. Save the shipping carton and packing materials in case you need to move or ship the switch later.

Related Documentation

Modified: 2015-06-23