Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

[an error occurred while processing this directive]

Pluggable Transceivers Supported on EX2200 Switches

Uplink ports and dual-purpose uplink ports on the front panel in EX2200 switches support SFP transceivers. This topic describes the optical interfaces supported for those transceivers. It also lists the copper interface supported for the SFP transceivers.

Note: We recommend that you use only optical transceivers and optical connectors purchased from Juniper Networks with your Juniper Networks device.

Caution: If you are having a problem running a Juniper Networks device that is using a third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC) can help you diagnose the source of the problem. Your JTAC engineer might recommend that you check the third-party optic or cable and potentially replace it with an equivalent Juniper Networks optic or cable that is qualified for the device.

Note: EX2200-C switches ensure normal operation in the temperature range 30º F (0º C) through 104º F (40º C) at altitudes up to 1,524 m (5,000 ft).
In the following conditions, use extended temperature range SFPs when fiber uplinks are used:

  • In the temperature range 104° F through 113° F (40° C up to 45° C) at altitudes up to 1,524 m (5,000 ft)
  • In the temperature range 95° F through 113° F (35° C up to 45° C) at altitudes above 1,524 m (5,000 ft) up to 3,048 m (10,000  ft)

The tables in this topic describe the optical interface support over single-mode fiber-optic (SMF) and multimode fiber-optic (MMF) cables and over the copper interface for SFP transceivers:

  • Table 17—Optical interface support and copper interface support for Gigabit Ethernet SFP transceivers in EX2200 switches except EX2200-C switches.
  • Table 18—Optical interface support for Fast Ethernet SFP transceivers except EX2200-C switches.
  • Table 19—Optical interface support and copper interface support for SFP transceivers in EX2200-C switches.

Table 17: Optical interface Support and Copper Interface Support for Gigabit Ethernet SFP Transceivers in EX2200 Switches Except EX2200-C Switches

Ethernet Standard

Specification

Value

1000BASE-T

Model number

EX-SFP-1GE-T

Rate

10/100/1000 Mbps

Connector type

RJ-45

Transmitter wavelength

Minimum launch power

Maximum launch power

Minimum receiver sensitivity

Maximum input power

Core/Cladding size

Modal bandwidth

Distance

100 m (328 ft)

Software required

Junos OS for EX Series switches, Release 10.1 or later

Support for Virtual Chassis configuration

Yes, starting with Junos OS Release 12.3R3

1000BASE-SX

Model number

EX-SFP-1GE-SX

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

850 nm

Minimum launch power

–9.5 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

0 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

62.5/125 µm

50/125 µm

50/125 µm

Fiber grade

FDDI

OM1

OM2

Modal bandwidth

160 MHz/km

200 MHz/km

400 MHz/km

500 MHz/km

Distance

220 m (722 ft)

275 m (902 ft)

500 m (1640 ft)

550 m (1804 ft)

Software required

Junos OS for EX Series switches, Release 10.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-1GE-LX

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–9.5 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–25 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

Support for Virtual Chassis configuration

Yes

1000BASE-BX-U

Model number

EX-SFP-GE10KT13R14

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1490 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–30 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-D

Model number

EX-SFP-GE10KT14R13

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1490 nm

Receiver wavelength

1310 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–30 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-U

Model number

EX-SFP-GE10KT13R15

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1550 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-D

Model number

EX-SFP-GE10KT15R13

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1550 nm

Receiver wavelength

1310 nm

Minimum launch power

–9 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-U

Model number

EX-SFP-GE40KT13R15

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1550 nm

Minimum launch power

–6.5 dBm

Maximum launch power

2 dBm

Minimum receiver sensitivity

–23 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

Yes

1000BASE-BX-D

Model number

EX-SFP-GE40KT15R13

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1550 nm

Receiver wavelength

1310 nm

Minimum launch power

–6.5 dBm

Maximum launch power

2 dBm

Minimum receiver sensitivity

–23 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-1GE-LX40K

Rate

1000 Mbps

Connector type

LC

Fiber count

Double

Transmitter wavelength

1310 nm

Minimum launch power

–14 dBm

Maximum launch power

–8 dBm

Minimum receiver sensitivity

–45 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LH (or 1000BASE-ZX)

Model number

EX-SFP-1GE-LH

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1550 nm

Minimum launch power

–2 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–25 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

70 km (43.5 miles)

Software required

Junos OS for EX Series switches, Release 10.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-GE80KCW1470

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1470 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 μm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-GE80KCW1490

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1490 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 μm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-GE80KCW1510

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1510 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 μm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-GE80KCW1530

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1530 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 μm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-GE80KCW1550

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1550 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 μm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-GE80KCW1570

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1570 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 μm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-GE80KCW1590

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1590 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 μm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-GE80KCW1610

Rate

1000 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1610 nm

Minimum launch power

0 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 μm

Modal bandwidth

Distance

80 km (49.7 miles)

DOM support

Available

Software required

Junos OS for EX Series switches, Release 12.1 or later

Support for Virtual Chassis configuration

Yes

Table 18: Optical interface Support for Fast Ethernet SFP Transceivers in EX2200 Switches Except EX2200-C Switches

Ethernet Standard

Specification

Value

100BASE-FX

Model number

EX-SFP-1FE-FX

Rate

100 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–20 dBm

Maximum launch power

–14 dBm

Minimum receiver sensitivity

–32.5 dBm

Maximum input power

–8 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

Fiber grade

FDDI/OM1

Modal bandwidth

500 MHz/km

Distance

2 km (1.2 miles)

Software required

Junos OS for EX Series switches, Release 10.1 or later

Support for Virtual Chassis configuration

No

100BASE-LX

Model number

EX-SFP-1FE-LX

Rate

100 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–15 dBm

Maximum launch power

–8 dBm

Minimum receiver sensitivity

–31.5 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

No

100BASE-BX-U

Model number

EX-SFP-FE20KT13R15

Rate

100 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1310 nm

Receiver wavelength

1550 nm

Minimum launch power

–14 dBm

Maximum launch power

–8 dBm

Minimum receiver sensitivity

–45 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

20 km (12.4 miles)

Software required

Junos OS for EX Series switches, Release 10.1 or later

Support for Virtual Chassis configuration

No

100BASE-BX-D

Model number

EX-SFP-FE20KT15R13

Rate

100 Mbps

Connector type

LC

Fiber count

Single

Transmitter wavelength

1550 nm

Receiver wavelength

1310 nm

Minimum launch power

–14 dBm

Maximum launch power

–8 dBm

Minimum receiver sensitivity

–45 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

20 km (12.4 miles)

Software required

Junos OS for EX Series switches, Release 10.1 or later

Support for Virtual Chassis configuration

No

100BASE-LX40K

Model number

EX-SFP-1FE-LX40K

Rate

100 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–5 dBm

Maximum launch power

0 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

40 km (24.8 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

No

100BASE-LH (or 100BASE-ZX)

Model number

EX-SFP-1FE-LH

Rate

100 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–5 dBm

Maximum launch power

0 dBm

Minimum receiver sensitivity

–32 dBm

Maximum input power

–8 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

80 km (49.7 miles)

Software required

Junos OS for EX Series switches, Release 11.2 or later

Support for Virtual Chassis configuration

No

Table 19: Optical interface Support and Copper Interface Support for SFP Transceivers in EX2200-C Switches

Ethernet Standard

Specification

Value

1000BASE-SX

Model number

EX-SFP-1GE-SX

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

850 nm

Minimum launch power

–9.5 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–21 dBm

Maximum input power

0 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

62.5/125 µm

50/125 µm

50/125 µm

Fiber grade

FDDI

OM1

OM2

Modal bandwidth

160 MHz/km

200 MHz/km

400 MHz/km

500 MHz/km

Distance

220 m (722 ft)

275 m (902 ft)

500 m (1640 ft)

550 m (1804 ft)

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

Extended Temp SFP 1000BASE-SX

Model number

EX-SFP-1GE-SX-EX

Rate

1000 Mbps

Connector type

LC

Fiber count

Transmitter wavelength

Minimum launch power

Maximum launch power

Minimum receiver sensitivity

Maximum input power

Fiber type

MMF

Core/Cladding size

Modal bandwidth

Transmitter wavelength

850 nm

Distance

550 m (1804 ft)

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

Extended Temp SFP 100BASE-FX

Model number

EX-SFP-1FE-FX-EX

Rate

1000 Mbps

Connector type

LC

Fiber count

Transmitter wavelength

Minimum launch power

Maximum launch power

Minimum receiver sensitivity

Maximum input power

Fiber type

MMF

Core/Cladding size

Modal bandwidth

Transmitter wavelength

1310 nm

Distance

2 km (1.2 miles)

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

100BASE-FX

Model number

EX-SFP-1FE-FX

Rate

100 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–20 dBm

Maximum launch power

–14 dBm

Minimum receiver sensitivity

–32.5 dBm

Maximum input power

–8 dBm

Fiber type

MMF

Core/Cladding size

62.5/125 µm

Fiber grade

FDDI/OM1

Modal bandwidth

500 MHz/km

Distance

2 km (1.2 miles)

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LX

Model number

EX-SFP-1GE-LX

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1310 nm

Minimum launch power

–9.5 dBm

Maximum launch power

–3 dBm

Minimum receiver sensitivity

–25 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

10 km (6.2 miles)

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

1000BASE-LH (or 1000BASE-ZX)

Model number

EX-SFP-1GE-LH

Rate

1000 Mbps

Connector type

LC

Fiber count

Dual

Transmitter wavelength

1550 nm

Minimum launch power

–2 dBm

Maximum launch power

5 dBm

Minimum receiver sensitivity

–25 dBm

Maximum input power

–3 dBm

Fiber type

SMF

Core/Cladding size

9/125 µm

Modal bandwidth

Distance

70 km (43.5 miles)

Software required

Junos OS for EX Series switches, Release 11.3 or later

Support for Virtual Chassis configuration

Yes

Related Documentation

Modified: 2015-06-23