Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

[an error occurred while processing this directive]

Related Documentation

Chassis Status LEDs in EX2200 Switches

The front panel of an EX2200 switch has two chassis status LEDs labeled SYS and ALM on the far right side of the panel. See Figure 7 and Figure 8.

Figure 7: Chassis Status LEDs in an EX2200 Switch Except the EX2200-C Switch

Chassis Status
LEDs in an EX2200 Switch Except the EX2200-C Switch

Figure 8: Chassis Status LEDs in an EX2200-C Switch

Chassis Status
LEDs in an EX2200-C Switch

Table 6 describes the chassis status LEDs in an EX2200 switch, their colors and states, and the status they indicate.

Table 6: Chassis Status LEDs in an EX2200 Switch

LED Label

Color

State and Description

SYS

Green

  • On steadily—The switch is functioning normally.
  • Blinking—The switch is booting.
  • Off—The switch is powered off or is halted.

ALM

Unlit

There is no alarm or the switch is halted.

Amber

There is a minor alarm.

Red

There is a major alarm.

A major alarm (red) indicates a critical error condition that requires immediate action.

A minor alarm (amber) indicates a noncritical condition that requires monitoring or maintenance. A minor alarm that is left unchecked might cause interruption in service or performance degradation.

Both LEDs can be lit simultaneously.

You can view the colors of the two LEDs remotely through the CLI by issuing the operational mode command show chassis led.

Related Documentation

Modified: 2015-06-23