Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

[an error occurred while processing this directive]

List of Figures

Figure 1: Front Panel of an EX2200 Switch with 48 Gigabit Ethernet Ports
Figure 2: Front Panel of an EX2200 Switch with 24 Gigabit Ethernet Ports
Figure 3: Front Panel of an EX2200-C Switch with 12 Gigabit Ethernet Ports (PoE+)
Figure 4: Front Panel of an EX2200-C Switch with 12 Gigabit Ethernet Ports (non-PoE)
Figure 5: Rear Panel of an EX2200 Switch with AC Power Supply
Figure 6: Rear Panel of an EX2200-C-12P Switch with Heatsink
Figure 7: Chassis Status LEDs in an EX2200 Switch Except the EX2200-C Switch
Figure 8: Chassis Status LEDs in an EX2200-C Switch
Figure 9: LEDs on the Network Port
Figure 10: LEDs on the Uplink Ports and Port Status Mode LEDs in an EX2200 Switch Except the EX2200-C Switch Model
Figure 11: Port Status Mode LEDs of the Dual-Purpose Uplink Ports of an EX2200-C Switch
Figure 12: LEDs on the Management Port on an EX2200 Switch Except the EX2200-C Switch Model
Figure 13: LEDs on the Management Port on an EX2200-C Switch
Figure 14: Airflow Through Non-PoE Models of EX2200 Switches Except the EX2200-C Switch Model
Figure 15: Airflow Through PoE Models of EX2200 Switches Except the EX2200-C Switch Models
Figure 16: Clearance Requirements for Airflow and Hardware Maintenance for EX2200 Switches Except EX2200-C Switch Models
Figure 17: Clearance Requirements for Airflow and Hardware Maintenance for EX2200-C Switch Models
Figure 18: Airflow Through PoE Models of EX2200 Switches Except EX2200-C Switch Models
Figure 19: Airflow Through Non-PoE Models of EX2200 Switches Except EX2200-C Switch Models
Figure 20: AC Plug Types
Figure 21: Attaching Rubber Feet to a Switch Chassis
Figure 22: Attaching a Cable Guard to an EX2200-C Switch
Figure 23: Securing the EX2200-C Switch Using Security Slots
Figure 24: Measurements for Installing Mounting Screws for EX2200-C Switch
Figure 25: Mounting the EX2200-C Switch On or Under a Desk Using Screws
Figure 26: Attaching a Cable Guard to an EX2200-C Switch
Figure 27: Securing the EX2200-C Switch Using Security Slots
Figure 28: Attaching the Mounting Bracket Along the Front of the Switch
Figure 29: Mounting the Switch on Two Posts of a Rack
Figure 30: Attaching the Front-Mounting Bracket to the Side Mounting-Rail
Figure 31: Attaching the Side Mounting-Rail to the Switch Chassis
Figure 32: Mounting the Switch to the Front Posts of a Rack
Figure 33: Sliding the Rear Mounting-Blades into the Side Mounting-Rail
Figure 34: Attaching Wall-Mount Brackets to a Switch Chassis
Figure 35: Measurements for Installing Mounting Screws
Figure 36: Mounting the Switch on a Wall
Figure 37: Measurements for Installing Mounting Screws for the EX2200-C Switch
Figure 38: Mounting the EX2200-C Switch on a Wall Using Screws
Figure 39: Attaching a Cable Guard to an EX2200-C Switch
Figure 40: Securing the EX2200-C Switch Using Security Slots
Figure 41: Mounting an EX2200-C Switch Using Magnet Mount
Figure 42: Attaching a Cable Guard to an EX2200-C Switch
Figure 43: Securing the EX2200-C Switch Using Security Slots
Figure 44: Installing a Transceiver in an EX Series Switch
Figure 45: Connecting the Grounding Lug to a Switch Mounted on Four Posts of a Rack
Figure 46: Connecting a Grounding Cable to an EX Series Switch
Figure 47: Connecting an AC Power Cord Retainer Clip to the AC Power Cord Inlet on an EX2200 Switch
Figure 48: Connecting an AC Power Cord to the AC Power Cord Inlet on an EX2200 Switch
Figure 49: Securing Ring Lugs to the Terminals on the DC Power Supply
Figure 50: Ethernet Cable Connector
Figure 51: Connecting a Switch to a Network for Out-of-Band Management
Figure 52: Ethernet Cable Connector
Figure 53: Connecting a Switch to a Management Console Through a Console Server
Figure 54: Connecting a Switch Directly to a Management Console
Figure 55: Connecting a Fiber-Optic Cable to an Optical Transceiver Installed in a Switch
Figure 56: LCD Panel in an EX3200, EX4200, EX4500, EX4550, or EX8200 Switch
Figure 57: LCD Panel in an EX4300 Switch
Figure 58: Removing a Transceiver from a Switch
Figure 59: Location of the Serial Number ID Label on EX2200 Switches
Figure 60: Placing a Component into an Antistatic Bag

Modified: 2015-06-23