Powering On and Powering Off the AX411 Access point

The access point does not have a dedicated power switch. The access point is powered on whenever either of the following two conditions is met:

To power on the access point:

  1. Do one of the following:
    • Connect the access point Ethernet port to an Ethernet connection configured for PoE.
    • Connect the Power connector on the front panel of the access point to the optional power supply.
  2. Check that the Power LED on the top of the access point lights steadily green.

To power off the access point:

  1. Do one of the following:
    • If the access point is powered by PoE, disconnect the Ethernet cable connected to the access point Ethernet port.
    • If the access point is powered by the optional power supply, disconnect the power supply from the Power connector on the access point front panel.
  2. Check that the Power LED on the top of the access point is unlit.

Related Documentation