Providing Power to the AX411 Access Point Using the Power Supply

If you do not use Power over Ethernet (PoE) to provide power to the AX411 Access Point, you must use the power supply.

To connect the access point to the power supply:

  1. Obtain the power supply from your Juniper Networks reseller. The power supply is not provided with the access point.
  2. Connect the DC power cable on the power supply to the access point.
  3. Connect the AC power cord to the socket on the power supply.
  4. Plug the AC power cord into an AC power outlet at your site.
  5. Check the Power LED on the top of the access point to make sure the device is receiving power.

Related Documentation