Testing Connectivity to the AX411 Access Point Wireless LAN

1. Confirm that the access point is connected to the services gateway. We recommend that you connect the access point to an Ethernet port other than ge-0/0/0.
2. Confirm that the Power LED on the access point is lit steady green, showing that the access point is powered on.
3. Confirm that the Status LED on the access point is lit steady green, showing that the access point is being managed by the services gateway.
4. Use a laptop computer or other wireless device to view the available networks near where the access point is installed. You should find a security-enabled network with juniper-default as its SSID. The default wireless LAN settings are described in Table 14.
5. Connect to the juniper-default network. When prompted for a WPA2-PSK security key, enter juniper-wireless.

   Table 14: AX411 Access Point Default Configuration Settings

   Parameter	Value
   SSID	juniper-default
   SSID broadcast	Enabled
   Security	WPA2–PSK
   WPA2–PSK Security Key	juniper-wireless
   Encapsulation	AES

Related Documentation

• AX411 Access Point Wireless LAN Initial Software Configuration Overview
• Powering On and Powering Off the AX411 Access point
• Installing Licenses for the AX411 Access Point on the SRX Series Device