Monitoring the AX411 Access Point with the Command-Line Interface

To monitor the AX411 Access Point with the command-line interface (CLI):

• Use the show wlan access-points command to display a list of access points and basic settings, as shown in the following example:

  root@srx210–1> show wlan access-points
  
  Active access points information
  
  
  Access-Point	        Type   	Interface    	Radio-mode/Channel
  gold				      	Ext    	vlan         	an/36, bgn/6
  silver				   	Ext    	vlan         	an/56, bgn/11

• To view detailed information about an access point, use the show wlan access-points detail access-point-name command to display detailed information, as shown in the following example:

  root@srx210–1> show wlan access-points detail gold
  
  Active access point detail information
  
  Access Point        : gold
  Type                : External
  Location            : Default Location
  Serial Number       : 850001761
  Firmware Version    : 10.1.2.3
  Access Interface    : vlan
  Packet Capture      : Disabled
  Ethernet Port:
      MAC Address     : 00:12:CF:C7:5D:00
      IPv4 Address    : 20.0.0.73
  Radio1:
      Status          : On
      MAC Address     : 00:12:CF:C7:5D:00
      Mode            : IEEE 802.11a/n
      Channel         : 36 (5180 MHz)
  Radio2:
      Status          : On
      MAC Address     : 00:12:CF:C7:5D:10
      Mode            : IEEE 802.11b/g/n
      Channel         : 6 (2437 MHz)

Related Documentation

• Monitoring the AX411 Access Point with the LEDs