Deploying WLANs with AX411 Access Points

To deploy a wireless network with AX411 Access Points, you install one or more access points throughout your site and connect them to Ethernet ports on the services gateway that manages the access points. You can provide power to the access points using Power over Ethernet (PoE) by connecting them to services gateway ports that have PoE capability. You can also provide power to the access points using either optional external power supplies or PoE adapters.

You can connect the access points either directly to the SRX Series device or to a Layer 2 switch that is connected to the SRX Series device.

Figure 2 shows a typical WLAN deployment in which four AX411 Access Points are connected directly to an SRX210 Services Gateway.

Figure 2: Typical WLAN Deployment

Typical WLAN Deployment

Figure 3 shows a WLAN deployment in which four AX411 Access Points are connected to an EX4200 Ethernet switch that is connected to an SRX210 Services Gateway.

Figure 3: WLAN Deployment Using an Ethernet Switch

WLAN Deployment Using
an Ethernet Switch

Related Documentation