AX411 Access Point Description

The Juniper Networks AX411 Access Point provides network access for wireless clients such as laptop or desktop computers, personal digital assistants (PDAs), and any other device equipped with a Wi-Fi adapter. The AX411 Access Point supports the new IEEE 802.11n wireless networking standard with backward compatibility for the IEEE 802.11a/b/g standards.

Figure 1 shows the AX411 Access Point.

Figure 1: AX411 Access Point

 AX411 Access Point

The AX411 Access Point is managed by a services gateway in the SRX200 line (SRX210, SRX220, or SRX240) or an SRX650 Services Gateway. You manage and configure access points through the command-line interface (CLI) and J-Web interface of the services gateway.

You can connect and use up to two access points on the services gateway without obtaining access point licenses. To use more than two access points, you must obtain an additional access point license (SKU AX411-2) and install it on the services gateway. You obtain access point licenses from your Juniper Networks representative or reseller.

Table 3 shows the maximum number of access points supported for each applicable services gateway type.

Table 3: Maximum Number of Access Points per Services Gateway Type

Services Gateway Type

Maximum Number of AX411 Access Points Supported









Note: If you have previously deployed a greater number of access points per services gateway than specified in Table 3, we recommend that when practical you reduce the number of access points to those specified. If you want to deploy more than four access points, we recommend that you use Juniper Networks WLA Series Wireless LAN access points and WLC Series Wireless LAN Controllers.

Related Documentation