Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Related Documentation

    Connect the ACX2000 Gateway to a Management Console or Auxiliary Device

    1. Turn off the power to the console or auxiliary device.
    2. Plug the RJ-45 end of the serial cable (Figure 6 shows the connector) into the CONSOLE/AUX port on the front panel. Figure 7 shows the ports.
    3. Plug the female DB-9 end into the device's serial port.

    Modified: 2016-04-11