Safety Warnings Summary
This is a summary of safety warnings. For a complete list of warnings, including translations, see the ACX6360 router documentation at https://www.juniper.net/documentation/product/en_US/acx6360.
Failure to observe these safety warnings can result in personal injury or death.
Permit only trained and qualified personnel to install or replace router components.
Perform only the procedures described in this quick start and the ACX6360 documentation. Other services must be performed only by authorized service personnel.
Before installing the router, read the planning instructions in the ACX6360 documentation to make sure that the site meets power, environmental, and clearance requirements for the router.
Before connecting the router to a power source, read the installation instructions in the ACX6360 documentation.
The ACX6360 router weighs approximately 30.4 lbs (13.8 kg). Manually installing the ACX6360-36C router in a rack requires two people to lift the router and install the mounting screws. To prevent injury, keep your back straight and lift with your legs, not your back.
If the rack has stabilizing devices, install them in the rack before mounting or servicing the router in the rack.
Before installing or after removing an electrical component, always place it component-side up on a flat antistatic mat or in an antistatic bag.
Do not work on the router or connect or disconnect cables during electrical storms.
Before working on equipment that is connected to power lines, remove jewelry, including rings, necklaces, and watches. Metal objects heat up when connected to power and ground and can cause serious burns or become welded to the terminals.
Power Cable Warning (Japanese)
The attached power cable is only for this product. Do not use this cable for another product.
Contacting Juniper Networks
For technical support, see:
http://www.juniper.net/support/requesting-support.html