Midmounting the Junos Space Appliance in a Two-Post Rack
This option is suitable for a two-post equipment rack. It allows the appliance to be mounted so that there is even clearance on the front and rear of the rack.
To mount the appliance in a two-post rack, do the following:
- Remove the two front-mount rails from either side of the chassis.
- Insert one midmount bracket to the center on either side of the chassis.
- Attach the chassis to the equipment rack and insert the other two midmount brackets on either side of the appliance to secure the chassis to the backs of the post, as shown in Figure 1.
- Verify that the mounting screws on one side of the rack are aligned with the mounting screws on the opposite side and that the appliance is level.