Guide That Contains This Content
[+] Expand All
[-] Collapse All
-
Connectivity Services Director User Guide
-
Overview
-
Working with Connectivity Services Director
- Connectivity Services Overview
- Understanding the Need for Connectivity Services Director for Managing Services
- Benefits of a Unified User Interface for Routing and Tunnel Services with Connectivity Services Director
- Connectivity Services Director Overview
- Understanding the Connectivity Services Director User Interface
- Understanding the Usage and Layout of Connectivity Services Director Views and Tasks
- Understanding the Management Lifecycle Modes in Connectivity Services Director
- Understanding Connectivity Services Director User Administration
- Logging In to Connectivity Services Director
- Accessing the Services Activation Director GUI
- Changing Your Password for Connectivity Services Director
- Logging Out of Connectivity Services Director
- Getting Started Assistant Overview in Services Activation Director
-
Service View Tasks and Lifecycle Modes
- Understanding the Service View Tasks Pane in Build Mode
- Understanding the Service View Tasks Pane in Deploy Mode
- Understanding the Service View Tasks Pane in Monitor Mode
- Understanding the Service View Tasks Pane in Fault Mode
- About Build Mode in Service View of Connectivity Services Director
- About Deploy Mode in Service View of Connectivity Services Director
- About Fault Mode in All Views of Connectivity Services Director
- About Monitor Mode in Service View of Connectivity Services Director
-
Network Services Overview
- Getting Started with Connectivity Services Director
- Prestaging Devices Overview
- Junos Space Layer 2 Services Overview
- Junos Space Layer 3 Services Overview
- Provisioning Process Overview
- Seamless MPLS Support in Junos Space Overview
- Service Attributes Overview
- Service Order States and Service States Overview
- Understanding VLAN Manipulation (Normalization and VLAN Mapping) on Ethernet Services
- VLAN Pool Profiles Overview
- Redundant Pseudowires for Layer 2 Circuits and VPLS
- VPLS over GRE Overview
- Junos Space Network Topology Overview
- Service Recovery Overview
- Multicast L3VPN Overview
- Multi-Chassis Link Aggregation Group Overview
- Multi-Chassis Automatic Protection Switching Overview
- Inverse Multiplexing for ATM Overview
- Rendezvous Point
- Understanding Multicast Rendezvous Points, Shared Trees, and Rendezvous-Point Trees
- Understanding PIM Sparse Mode
- Configuring Shared-Tree Data Distribution Across Provider Cores for Providers of MBGP MVPNs
- Configuring SPT-Only Mode for Multiprotocol BGP-Based Multicast VPNs
- Configuring VRF Route Targets for Routing Instances for an MBGP MVPN
- Static Pseudowire Provisioning for VPLS Services
-
Working with Connectivity Services Director
-
Getting Started With Connectivity Services Director
- Understanding Connectivity Services Director System Administration and Preferences
-
Working with the Dashboard
- About the Dashboard
- Using the Dashboard
- Dashboard Widget Reference
-
Working in Build Mode
- About Build Mode
- Discovering Devices
- Setting Up Sites and Locations Using the Location View
- Building a Topology View of the Network
- Creating Custom Device Groups
- Configuring Quick Templates
- Configuring Device Settings
- Configuring Class of Service (CoS)
- Configuring Multichassis Link Aggregation Groups (MC-LAGs)
-
Managing Network Devices
- Viewing the Device Inventory Page in Device View of Connectivity Services Director
- Viewing the Physical Inventory of Devices
- Viewing Licenses With Connectivity Services Director
- Viewing a Device's Current Configuration from Connectivity Services Director
- Accessing a Device’s CLI from Connectivity Services Director
- Accessing a Device’s Web-Based Interface from Connectivity Services Director
- Deleting Devices
- Rebooting Devices
-
Prestaging
-
Prestaging Devices Overview
- Prestaging Devices Process Overview
- Prestaging Workflow in Connectivity Services Director
- Prerequisites for Prestaging Devices in Connectivity Services Director
- Discovering and Assigning All N-PE Devices
- Discovering and Assigning N-PE Devices with Exceptions
- Prestaging ATM and TDM Pseudowire Devices
- Discovering and Assigning Provider Role or LSP Role for Devices with Exceptions
- Discovering and Assigning All Provider or LSP Devices
- Prestaging Rules
- Prestaging: Managing Devices and Device Roles
- Prestaging: Managing IP Addresses
- Device Configuration Prerequisites to Prestaging Examples
-
Prestaging Devices Overview
-
Service Design: Working with Service Definitions
-
Service Design: Predefined Service Definitions
- Predefined Service Definitions
- Predefined Point-to-Point Service Definitions
- Predefined Multipoint-to-Multipoint Ethernet Service Definitions
- Predefined Point-to-Multipoint Ethernet Service Definitions
- Predefined Full Mesh Layer 3 VPN Service Definitions
- Predefined Hub-and Spoke Layer 3 VPN Service Definitions
-
Service Design: Managing Point-to-Point Service Definitions
- Choosing a Predefined Service Definition or Creating a New Service Definition
- Creating a Point-to-Point ATM or TDM Pseudowire Service Definition
- Creating a Point-to-Point Ethernet Service Definition
- Modifying a Custom Service Definition
- Publishing a Custom Service Definition
- Unpublishing a Custom Service Definition
- Deleting a Customized Service Definition
- Viewing Service Definitions
- Service Design: Managing VPLS Service Definitions
- Service Design: Managing Layer 3 VPN Service Definitions
-
Service Design: Predefined Service Definitions
-
Service Provisioning: Working with Customers
- Service Provisioning: Managing Customers
-
Working in Deploy Mode
- About Deploy Mode
-
Deploying and Managing Device Configurations
- Deploying Configuration to Devices
- Managing Configuration Deployment Jobs
- Deploy Configuration Window
- Approving Change Requests
- Enabling SNMP Categories and Setting Trap Destinations
- Understanding Resynchronization of Device Configuration
- Resynchronizing Device Configuration
- Managing Device Configuration Files
- Enabling or Disabling Network Ports on Routers
- Deploying and Managing Software Images
-
Service Provisioning: Working with Service Orders
- Service Provisioning: Viewing the Configured Services and Service Orders
-
Service Provisioning: Managing Point-to-Point Service Orders
- Creating a Service Order
- Creating a Point-to-Point ATM or TDM Pseudowire Service Order
- Creating a Point-to-Point Service Order
- Creating a Bulk-Provisioning Service Order for Pseudowire Services
- Creating an Inverse Multiplexing for ATM Service Order
- Provisioning a Single-Ended Point-to-Point Service
- Selecting Specific LSPs for Connectivity Services
- Stitching Two Point-to-Point Pseudowires
- Deactivating a Service
- Reactivating a Service
- Force-Deploying a Service
- Decommissioning a Service
- Viewing Alarms for a Service
- Inline Editing of VPLS and Layer 3 VPN Service Orders
- Service Provisioning: Managing VPLS Service Orders
-
Service Provisioning: Managing Layer 3 VPN Service Orders
- Stitching a Pseudowire to an L3VPN Service
- Creating a Full Mesh Layer 3 VPN Ethernet Service Order
- Creating a Hub-and-Spoke Layer 3 VPN Service Order
- Selecting a Published L3VPN Service Definition for a Service Order
- Entering Layer 3 VPN Order Information
- Selecting Endpoint PE Devices or Nodes
- Creating a Service Order Based on a Service Definition with a Template
- Deploying a Layer 3 VPN Service Order
- Creating a Multicast VPN Service Order
-
Service Provisioning: Working with Services Deployment
-
Service Provisioning: Managing Deployed Services
- Managing Service Configuration Deployment Jobs
- Deploying Services Configuration to Devices
- Deploy Configuration Window
- Managing Jobs
- Deleting a Partial Configuration of an LSP Service Order
- Deleting a Service Order
- Deploying a Service
- Validating the Pending Configuration of a Service Order
- Viewing the Configuration of a Pending Service Order
- Viewing Decommissioned Point-Point, VPLS, and L3VPN Service Orders
- Editing a Service Name
- Modifying a Point-to-Point Ethernet Service
- Modifying a Multipoint-to-Multipoint Ethernet Service
- Modifying a Point-to-Multipoint Ethernet Service
- Modifying a Hub-and-Spoke Layer 3 VPN Service Order
- Modifying a Full Mesh Layer 3 VPN Ethernet Service
- Understanding Service Validation
-
Service Provisioning: Managing Deployed Services
-
Auditing Services and Viewing Audit Results
-
Service Provisioning: Auditing Services
- Performing a Functional Audit
- Performing a Configuration Audit
- Troubleshooting N-PE Devices Before Provisioning a Service
- Modifying the Application Settings of Connectivity Services Director
- Troubleshooting the Endpoints of Services
- Basic Requirements of Operational Scripts
- Viewing Configuration Audit Results
- Viewing Functional Audit Results
- Viewing Functional Audit Results for an Inverse Multiplexing for ATM Service
- Modifying a Saved Service Order
- Viewing Service-Level Alarms
- Troubleshooting Devices and Services
-
Service Provisioning: Auditing Services
-
Working in Monitor Mode
- About Monitor Mode
- Monitoring Traffic
- Monitoring Devices
- General Monitoring
-
Monitor Reference
- Error Trend Monitor
- Equipment Status Summary Monitor
- Equipment Summary By Type Monitor
- Port Status Monitor
- Port Utilization Monitor
- Status Monitor for Routers
- Traffic Trend Monitor
- Unicast vs Broadcast/Multicast Monitor
- Unicast vs Broadcast/Multicast Trend Monitor
- Session Trends Monitor
- Current Sessions by Type Monitor
- User Session Details Window
- Current Active Alarms Monitor (All Views Except Service View)
- Top Sessions by MAC Address Monitor
- Top APs by Session Monitor
- Radio Technology Type Statistics Monitor
- Top Talker - Wired Devices Monitor
- Top Users Monitor
- Top APs by Traffic Monitor
- Top Talker - Wireless Devices Monitor
- RF Interference Sources Monitor for Devices
-
Detecting and Examining the Health and Performance of Services
- Service Monitoring Capabilities in Connectivity Services Director
- Computation of Statistics Polled from Devices for Display in Widgets on Monitoring Pages
- Configuring the Aggregation Method for Viewing Monitoring Details
- Viewing the Service Monitoring Summary Page for a Consolidated Listing of Services
- Monitoring the Service Summary Details of P2P Services for Optimal Debugging
- Monitoring the Service Summary Details of VPLS Services for Optimal Debugging
- Monitoring the Service Summary Details of Layer 3 VPN Services for Optimal Debugging
- Monitoring the Service Traffic Statistics of P2P Services for Correlating Device Counters
- Monitoring the Service Traffic Statistics of VPLS Services for Correlating Device Counters
- Monitoring the Service Traffic Statistics of Layer 3 VPN Services for Correlating Device Counters
- Monitoring the Service Transport Details of P2P Services for Easy Analysis
- Monitoring the Service Transport Details of VPLS Services for Easy Analysis
- Monitoring the Service Transport Details of Layer 3 VPN Services for Easy Analysis
- Viewing Y.1731 Performance Monitoring Statistics for Point-to-Point Services
- Viewing Y.1731 Performance Monitoring Statistics for VPLS Services
- Clearing Interface Statistics
- Viewing MAC Table Details
- Viewing Interface Statistics
- Viewing Interface Status Details
- MPLS Connectivity Verification and Troubleshooting Methods
- Using MPLS Ping
- Pinging VPNs, VPLS, and Layer 2 Circuits
- Monitoring Network Reachability by Using the MPLS Ping Capability
- Monitoring Network Reachability by Using the Layer 3 VPN Ping Capability
- Routing Table Overview
- Viewing Routing Table Details
-
Working in Fault Mode
- About Fault Mode
- Using Fault Mode
-
Fault Reference
- Alarm Detail Monitor (All Views Except Service View)
- Alarm Detail Monitor (Service View)
- Current Active Alarms Monitor (Service View)
- Alarms by Category Monitor
- Alarms by Severity Monitor (Service View)
- Alarms by State Monitor
- Alarm Trend Monitor (Service View)
- Alarms by Severity Monitor (All Views Except Service View)
- Alarms by State Monitor (All Views Except Service View)
- Current Active Alarms Monitor (All Views Except Service View)
- Alarm Trend Monitor (All Views Except Service View)
-
End-to-End Configuration Examples
-
Configuration Scenarios
- Example: Configuring and Deploying a Point-to-Point Ethernet Service
- Example: Configuring and Deploying a Multipoint-to-Multipoint VPLS Service
- Example: Configuring and Deploying a Layer 3 VPN Full-Mesh Service
- Understanding Zero Touch Provisioning in Connectivity Services Director
- Zero Touch Provisioning and Autoinstallation on ACX Series and SRX Series Devices Using Junos Space Platform
-
Configuration Scenarios
-
Working with Chassis View
- Working with Devices
- Managing CLI Configlets
-
Working with User Roles
- Managing User Roles
-
Working with Tunnel Services
- Tunnel Services Overview
-
Service Design and Provisioning: Managing and Deploying Tunnel
Services
- Managing Devices and Tunnel Services Overview
- Discovering Tunnel Devices
- Creating an RSVP LSP Service Order
- Viewing the Configured LSP Services
- Modifying an Explicit Path in RSVP LSP Services
- Modifying an RSVP LSP Service
- Viewing LSP Services in Deploy Mode
- Viewing LSP Service Orders in a Table
- Deactivating an LSP Service
- Reactivating an LSP Service
- Force-Deploying an LSP Service
- Viewing Alarms for an LSP Service
- Managing Deployment of LSP Services Configuration to Devices
- Deploying an LSP Service
- Deleting a Partial Configuration of an LSP Service Order
- Deleting an LSP Service Order
- Validating the Pending Configuration of an LSP Service Order
- Viewing the Configuration of a Pending LSP Service Order
- Viewing the Configuration Details of RSVP LSP Services
- Viewing Decommissioned LSP Service Orders
-
Monitoring and Troubleshooting Tunnel Services
- Performing a Functional Audit for LSP Services
- Viewing Functional Audit Results for LSP Services
- Examining the LSP Summary Details for Effective Troubleshooting
- Troubleshooting the Endpoints of RSVP LSP Services
- Clearing LSP Statistics
- Monitoring Network Reachability by Using the MPLS Traceroute Capability
- Monitoring Network Reachability by Using the MPLS Ping Capability for RSVP LSPs
-
Appendix: Managing Network Activate Features Using the Older
Version of Services Activation Director
- Prestaging: Creating and Managing Multihomed Groups
- Prestaging Services
-
Service Design: Working with Point-to-Point, Layer 3 VPN, and
VPLS Service Templates
- Service Templates Overview
- Service Templates Workflow
- Applying a Service Template to a Service Definition
- Creating a Service Template
- Deleting a Service Template
- Exporting a Service Template
- Finding Configuration Options
- Importing a Service Template
- Modifying a Service Template
- Specifying Service-Specific Values
- User Privileges in Service Templates
- Provisioning Dynamic Attributes to Specify the Device XPath
- Viewing Service Template Inventory
- Service Provisioning: Working with Threshold Alarm Profiles
- Downloads
-
Overview
This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.
