Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Unpacking the JATP400

 

Overview of Unpacking the JATP400

To unpack the JATP400:

  1. Gather the tools required to unpack the JATP400.
  2. Remove the JATP400 appliance and all items from the shipping container. See, Unpacking the JATP400.
  3. Verify that all parts have been received. See, Verifying the JATP400 Parts Received.

Unpacking the JATP400

Gather the tools required to unpack the JATP400 appliance:

  • Phillips (+) screwdriver, number 1

  • Phillips (+) screwdriver, number 3

Tip

Save the shipping materials in case you need to move or ship the device later.

Note

Do not unpack the device until you are ready to begin installation.

To unpack the JATP400:

  1. Move the cardboard carton to a staging area as close to the installation site as possible, where you have enough room to remove the components from the chassis.
  2. Position the cardboard carton with the arrows pointing up.
  3. Carefully open the top of the cardboard carton.
  4. Remove the foam covering the top of the JATP400 appliance.
  5. Remove the accessory box.
  6. Verify the parts received against the lists in Verifying the JATP400 Parts Received.

Verifying the JATP400 Parts Received

The JATP400 appliance shipment package contains a packing list. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and carries a brief description of each part in your order.

If any part on the packing list is missing or damaged, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.

Table 1 lists the JATP400 parts received through shipment.

Table 1: Parts List for a JATP400 Appliance

Part

Quantity

JATP400 appliance

1

End User License Agreement

1

Product registration information

1

Documentation roadmap card

1

Front bezel

1

Ethernet cable, 7 feet

2

DB-9 to RJ-45 adapter

1

Rail kit

1 set

Screws bag

1

Rail adapters

1

AC power cord

2