To Redistribute
Routes into RIPngRoute redistribution is the process of importing a route into the current routing domain from another part of the network that uses another routing protocol. When this occurs, the current domain has to translate all the routing information, particularly known routes, from the other protocol. Note that you must configure at least one route map before you can configure a redistribution rule. For more information, see Route Map Configuration.
To Redistribute
Routes into RIPngEnter the necessary information:
Route Map: The drop-down list displays the previously configured route maps. Select the route map that defines the routes to be redistributed.
Protocol: Specifies the protocol by which the route map determines whether to forward or deny an incoming packet. Select one of the following:
Connected: Specifies that the route map performs an action only on directly connected routes.
Discovered: Specifies that the route map performs an action only on discovered routes.
Imported: Specifies that the route map performs an action only on redistributed routes in the network.
BGP: Specifies that the route map performs an action only on BGP routes in the network.
OSPFV3: Specifies that the route map performs an action only on OSPFv3 routes in the network.
Static: Specifies that the route map performs an action only on static routes in the network.
Click Add to create the redistribution rule.
Click Add to create the redistribution rule.
To Remove
a Route Redistribute RuleClick Remove in the Action column of the rule that you want to delete.
A system message prompts you to confirm the removal.
Click OK to confirm the removal or Cancel to cancel it.
From this page, you can perform the following configuration:
To Configure Basic RIPng ParametersTo configure basic RIPng parameter, see RIPng Virtual Routers Settings.