To Redistribute
Routes into OSPFv3Route redistribution is the process of importing a route into the current routing domain from another part of the network that uses another routing protocol. When this occurs, the current domain has to translate all the routing information, particularly known routes, from the other protocol. Note that you must configure at least one route map before you can configure a redistribution rule. For more information, see Route Map Configuration
To Redistribute
Routes into OSPFv3Enter the necessary information:
Route Map: The drop-down list displays the previously configured route maps. Select the route map that defines the routes to be redistributed.
Protocol: Specifies the protocol by which the route map determines whether to forward or deny an incoming packet. Select one of the following:
BGP: Specifies that the route map performs an action only on BGP routes in the network.
RIPng: Specifies that the route map performs an action only on RIPng routes in the network.
Connected: Specifies that the route map performs an action only on directly connected routes.
Discovered: Specifies that the route map performs an action only on discovered routes.
Imported: Specifies that the route map performs an action only on redistributed routes in the network.
Static: Specifies that the route map performs an action only on static routes in the network.
Click Add to create the redistribution rule.
The new redistribution rule is added to the table.
Enter the necessary information:
Route Map: The drop-down list displays the previously configured route maps. Select the route map that defines the routes to be redistributed.
Protocol: Specifies the protocol by which the route map determines whether to forward or deny an incoming packet. Select one of the following:
BGP: Specifies that the route map performs an action only on BGP routes in the network.
RIPng: Specifies that the route map performs an action only on RIPng routes in the network.
NHRP: Specifies that the route map performs an action only on Next Hop Resolution Protocol (NHRP) routes in the network.
Connected: Specifies that the route map performs an action only on directly connected routes.
Imported: Specifies that the route map performs an action only on redistributed routes in the network.
Static: Specifies that the route map performs an action only on static routes in the network.
Click Add to create the redistribution rule.
The new redistribution rule is added to the table.
To Remove a Route Redistribution
RuleClick Remove in the Action column of the rule that you want to delete.
A system message prompts you to confirm the removal.
Click OK to confirm the removal, or Cancel to cancel it.
From this page, you can perform the following configurations:
To Configure
Basic OSPFv3 ParametersTo configure basic OSPFv3 parameters, see OSPFv3 Virtual Router Settings.
To Configure OSPFv3 AreasTo configure OSPFv3 areas, see OSPFv3 Areas.
To
Summarize Imported Routes into an OSPFv3 Domain
To summarize imported routes into an OSPFv3 domain, click Summary Import. For more information, see OSPFv3 Summary Route Importation.
To Configure
an OSPFv3 Virtual Link
To configure virtual links, click Virtual Link. For more information, see OSPFv3 Virtual Links.
To Configure
an OSPFv3 Interface
To configure an OSPFv3 interface, click Interface. For more information, see OSPFv3 Interface.