To Add a Proxy ARP EntryWhen an administrator adds a proxy Address Resolution Protocol (ARP) entry to a particular interface, ScreenOS uses that interface to import traffic destined for the configured IP address range. The administrator can configure no more than 256 proxy ARP entries per interface.
The administrator can configure a proxy ARP entry on any interface. The security device responds to ARP requests that arrive at this interface if the destination falls within the proxy ARP entry IP range.
Tip: Use the proxy ARP entry along with a destination translation policy.
To Add a Proxy ARP EntryIP Address Range: Specify the IP address range by entering the minimum and maximum IP address.
Click Add to add the proxy ARP entry to the interface.
The table lists the proxy ARP entries configured for the interface and the following information for each:
ip_min: Specifies the minimum IP address in the IP range.
ip_max: Specifies the maximum IP address in the IP range.
Interface: Specifies the interface name.
vsys_name: Specifies the virtual system name.
Configure: Click Remove to delete the proxy ARP entry.