Target Address Configuration

The administrator can configure up to 32 SNMPv3 targets.

To Create a New Target Address

  1. Enter the following information:

Target Name: Specify the name of the target.

Target IPv4 Address/Netmask: Specify the IPv4 address and netmask.

Target IPv6 Address/Netmask: Specify the IPv6 address and netmask.

You can enter both IPv4 and IPv6 IP addresses. The system sends the trap to the target if the mask is 32 for IPv4 addresses or 128 for IPv6 addresses.

Trap Port: Specify the trap port.

Target Parameter: Specify the target parameter.

Taglist: Specify a tag for the target from the taglist. You can specify no more than eight tags to a target. Each community has a tag. When an SNMPv1 or SNMPv2 request is received, the system checks whether the source is a valid target with the assigned tag of the community.

  1. Click OK to save the configuration and add the target address.