Technical Documentation
New
Monitoring the Status of RADIUS Relay UDP Checksums
Purpose
Display status of RADIUS relay UDP checksums.
Action
To display the status of UDP checksums:
host1(config)#show radius relay udp-checksum udp-checksums enabled
Meaning
Table 1 lists the show radius relay udp-checksum command output fields.
Table 1: show radius relay udp-checksum Output Fields
Field Name | Field Description |
|---|---|
udp-checksums | Status of UDP checksums: enabled or disabled |
Published: 2012-06-27
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
