Technical Documentation
New
Monitoring Included RADIUS Attributes
Purpose
Display the RADIUS attributes that are included in and excluded from Acct-On, Acct-Off, Access-Request, Acct-Start, and Acct-Stop messages.
Action
To display the list of included RADIUS attributes:
host1# show radius attributes-included
Account Account Access Account Account
Attribute Name On Off Request Start Stop
-------------------------- ------- ------- -------- -------- --------
access-loop-parameters n/c n/c disabled n/c n/c
acct-authentic enabled enabled n/c n/c n/c
acct-delay-time enabled enabled n/c n/c n/c
acct-link-count n/c n/c n/c enabled enabled
acct-multi-session-id n/c n/c disabled enabled enabled
acct-session-id enabled enabled enabled n/c n/c
acct-terminate-cause n/c enabled n/c n/c n/c
acct-tunnel-connection n/c n/c enabled enabled enabled
ascend-num-in-multilink n/c n/c disabled disabled disabled
called-station-id n/c n/c enabled enabled enabled
downstream-calculated-qos-rate n/c n/c disabled disabled disabled
upstream-calculated-qos-rate n/c n/c disabled disabled disabled
calling-station-id n/c n/c enabled enabled enabled
class n/c n/c n/c enabled enabled
connect-info n/c n/c enabled enabled enabled
delegated-ipv6-prefix n/c n/c n/c disabled disabled
dhcp-options n/c n/c disabled disabled disabled
dhcp-option-82 n/c n/c disabled disabled disabled
dhcp-option82-circuitid n/c n/c enabled disabled disabled
dhcp-option82-remoteid n/c n/c enabled disabled disabled
dhcp-mac-address n/c n/c disabled disabled disabled
dhcp-gi-address n/c n/c disabled disabled disabled
dsl-forum-attributes(vsa) n/c n/c disabled disabled disabled
ds-lite-tunnel-name n/c n/c n/c disabled disabled
egress-policy-name(vsa) n/c n/c n/c enabled enabled
ipv6-egress-policy-name(vsa) n/c n/c n/c enabled enabled
event-timestamp enabled enabled n/c enabled enabled
framed-compression n/c n/c n/c enabled enabled
framed-interface-id n/c n/c n/c disabled disabled
framed-ip-address n/c n/c n/c enabled enabled
framed-ip-netmask n/c n/c n/c enabled enabled
framed-ipv6-pool n/c n/c n/c disabled disabled
framed-ipv6-prefix n/c n/c n/c disabled disabled
framed-ipv6-route n/c n/c n/c disabled disabled
framed-route n/c n/c n/c disabled disabled
icr-partition-id(vsa) n/c n/c disabled disabled disabled
ingress-policy-name(vsa) n/c n/c n/c enabled enabled
ipv6-ingress-policy-name(vsa) n/c n/c n/c enabled enabled
input-gigapkts(vsa) n/c n/c n/c n/c enabled
input-gigawords n/c n/c n/c n/c enabled
interface-description(vsa) n/c n/c enabled enabled enabled
ipv6-input-octets(vsa) n/c n/c n/c n/c enabled
ipv6-output-octets(vsa) n/c n/c n/c n/c enabled
ipv6-input-packets(vsa) n/c n/c n/c n/c enabled
ipv6-output-packets(vsa) n/c n/c n/c n/c enabled
ipv6-input-gigawords(vsa) n/c n/c n/c n/c enabled
ipv6-output-gigawords(vsa) n/c n/c n/c n/c enabled
ipv6-local-interface(vsa) n/c n/c n/c disabled disabled
ipv6-nd-ra-prefix(vsa) n/c n/c n/c disabled disabled
ipv6-primary-dns(vsa) n/c n/c n/c disabled disabled
ipv6-secondary-dns(vsa) n/c n/c n/c disabled disabled
ipv6-virtual-router(vsa) n/c n/c n/c disabled disabled
l2c-downstream-data(vsa) n/c n/c disabled disabled disabled
l2c-upstream-data(vsa) n/c n/c disabled disabled disabled
l2cd-acc-loop-cir-id(vsa) n/c n/c disabled disabled disabled
l2cd-acc-aggr-cir-id-bin(vsa) n/c n/c disabled disabled disabled
l2cd-acc-aggr-cir-id-asc(vsa) n/c n/c disabled disabled disabled
l2cd-act-data-rate-up(vsa) n/c n/c disabled disabled disabled
l2cd-act-data-rate-dn(vsa) n/c n/c disabled disabled disabled
l2cd-min-data-rate-up(vsa) n/c n/c disabled disabled disabled
l2cd-min-data-rate-dn(vsa) n/c n/c disabled disabled disabled
l2cd-att-data-rate-up(vsa) n/c n/c disabled disabled disabled
l2cd-att-data-rate-dn(vsa) n/c n/c disabled disabled disabled
l2cd-max-data-rate-up(vsa) n/c n/c disabled disabled disabled
l2cd-max-data-rate-dn(vsa) n/c n/c disabled disabled disabled
l2cd-min-lp-data-rate-up(vsa) n/c n/c disabled disabled disabled
l2cd-min-lp-data-rate-dn(vsa) n/c n/c disabled disabled disabled
l2cd-max-interlv-delay-up(vsa) n/c n/c disabled disabled disabled
l2cd-act-interlv-delay-up(vsa) n/c n/c disabled disabled disabled
l2cd-max-interlv-delay-dn(vsa) n/c n/c disabled disabled disabled
l2cd-act-interlv-delay-dn(vsa) n/c n/c disabled disabled disabled
l2cd-dsl-line-state(vsa) n/c n/c disabled disabled disabled
l2cd-dsl-type(vsa) n/c n/c disabled disabled disabled
l2tp-ppp-disconnect-cause n/c n/c n/c n/c disabled
mlppp-bundle-name n/c n/c enabled enabled enabled
nas-identifier enabled enabled enabled enabled enabled
nas-port n/c n/c enabled enabled enabled
nas-port-id n/c n/c enabled enabled enabled
nas-port-type n/c n/c enabled enabled enabled
output-gigapkts(vsa) n/c n/c n/c n/c enabled
output-gigawords n/c n/c n/c n/c enabled
pcp-server-name(vsa) n/c n/c n/c disabled disabled
pppoe-description(vsa) n/c n/c enabled enabled enabled
profile-service-descr(vsa) n/c n/c disabled disabled disabled
qos-profile-name (vsa) n/c n/c n/c disabled disabled
tunnel-assignment-id n/c n/c n/c enabled enabled
tunnel-client-auth-id n/c n/c enabled enabled enabled
tunnel-client-endpoint n/c n/c enabled enabled enabled
tunnel-interface-id n/c n/c disabled disabled disabled
tunnel-medium-type n/c n/c enabled enabled enabled
tunnel-preference n/c n/c n/c enabled enabled
tunnel-server-attributes n/c n/c disabled disabled disabled
tunnel-server-auth-id n/c n/c enabled enabled enabled
tunnel-server-endpoint n/c n/c enabled enabled enabled
tunnel-type n/c n/c enabled enabled enabled
Meaning
Table 1 lists the show radius attributes-included command output fields.
Table 1: show radius attributes-included Output Fields
Field Name | Field Description |
|---|---|
Attribute Name | Name of the RADIUS attribute |
Account On | Include status of the attribute in Acct-On messages: enabled, disabled, not configurable (n/c) |
Account Off | Include status of the attribute in Acct-Off messages: enabled, disabled, n/c |
Access Request | Include status of the attribute in Access Request messages: enabled, disabled, n/c |
Account Start | Include status of the attribute in Acct-Start messages: enabled, disabled, n/c |
Account Stop | Include status of the attribute in Acct-Stop messages: enabled, disabled, n/c |
Published: 2012-06-27
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
