Technical Documentation
New
Monitoring Control Plane Policer Information
Purpose
Display information about control plane policer for a specified protocol or all protocols.
Action
To display information about control plane policer:
host1#show control-plane policer protocol
Burst
Rate Size Packets Packets
Protocol Enabled (pps) (pkts) Committed Exceeded
----------------------------- ------- ----- ------ ---------- ----------
PppEchoRequest false 50 50 0 0
PppEchoReply false 50 50 0 0
PppEchoReplyFast false 50 50 0 0
PppControl false 50 50 0 0
AtmControl false 50 50 0 0
AtmOam false 50 50 0 0
AtmDynamicIf false 50 50 0 0
AtmInverseArp false 50 50 0 0
FrameRelayControl false 50 50 0 0
FrameRelayArp false 50 50 0 0
PppoeControl false 50 50 0 0
PppoePppConfig false 50 50 0 0
EthernetArp false 50 50 0 0
EthernetArpMiss false 50 50 0 0
EthernetLacp false 50 50 0 0
EthernetDynamicIf false 50 50 0 0 Meaning
Table 1 lists the show control-plane policer command output fields.
Table 1: show control-plane policer Output Fields
Field Name | Field Description |
|---|---|
Protocol | Name of the protocol |
Enabled | True or False |
Rate (pps) | Rate, in packets per second in the range 0–10000 |
Burst Size (pkts) | Burst size, in packets, in the range 0–10000 |
Packets Committed | Number of packets committed |
Packets Exceeded | Number of packets exceeded |
Published: 2012-06-21
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
