Technical Documentation
New
Monitoring the Mapping for User Domains and Virtual Routers with AAA
Purpose
Display the mapping between user domains and virtual routers.
Action
To display the mapping between user domains and virtual routers:
host1#show aaa domain-map
Domain: lac-tunnel; router-name: lac; ipv6-router-name: default Tunnel Tunnel Tunnel Tunnel Tunnel Tag Tunnel Peer Source Type Medium Password Tunnel Id ------ ----------- ------ ------ ------ -------- ----------- 5 192.168.1.1 <null> l2tp ipv4 welcome lac-tunnel
Tunnel Tunnel Tunnel Tunnel Server Tunnel Max Tag Client Name Name Preference Sessions Tunnel RWS ------ ----------- ------ ---------- -------- -------------- 5 lac boston 5 0 4
Tunnel
Tunnel Tunnel Tunnel Tx
Tunnel Virtual Failover Switch Speed
Tag Router Resync Profile Method
------ ------- -------- --------- ------
5 <null> <null> denver qosMeaning
Table 1 lists the show aaa domain-map command output fields.
Table 1: show aaa domain-map Output Fields
Field Name | Field Description |
|---|---|
Domain | Name of the domain |
router-name | Virtual router to which user domain name is mapped |
router-mask | IPv4 mask of the local interface |
tunnel-group | Name of the tunnel group assigned to the domain map |
ipv6-router-name | IPv6 virtual router to which user domain name is mapped |
local-interface | Interface information to use on the local (E Series) side of the subscriber’s interface |
ipv6-local-interface | IPv6 interface information to use on the local (E Series) side of the subscriber’s interface |
poolname | Local address pool from which the router allocates addresses for this domain |
IP hint | IP hint is enabled |
strip-domain | Strip domain is enabled |
override-username | Single username used for all users from a domain in place of the values received from the remote client |
override-password | Single password used for all users from a domain in place of the values received from the remote client |
Tunnel Tag | Tag that identifies the tunnel |
Tunnel Peer | Destination address of the tunnel |
Tunnel Source | Source address of the tunnel |
Tunnel Type | L2TP |
Tunnel Medium | Type of medium for the tunnel; only IPv4 is supported |
Tunnel Password | Password for the tunnel |
Tunnel Id | ID of the tunnel |
Tunnel Client Name | Host name that the LAC sends to the LNS when communicating to the LNS about the tunnel |
Tunnel Server Name | Host name expected from the peer (the LNS) when during tunnel startup |
Tunnel Preference | Preference level for the tunnel |
Tunnel Max Sessions | Maximum number of sessions allowed on a tunnel |
Tunnel RWS | L2TP receive window size (RWS) for a tunnel on the LAC; displays either the configured value or the default behavior, which is indicated by system chooses |
Tunnel Virtual Router | Name of the virtual router to map to the user domain name |
Tunnel Failover Resync | L2TP peer resynchronization method |
Field descriptions | The actual fields displayed depend on your configuration |
Tunnel Switch Profile | Name of the L2TP tunnel switch profile |
Tunnel Tx Speed Method | Method that the router uses to calculate the transmit connect speed of the subscriber’s access interface: static layer2, dynamic layer2, qos, actual, not set |
