Technical Documentation
New
Monitoring an IP Profile
Purpose
Display information about a specific IP profile.
Action
To display information about a specific IP profile:
host1#show ip profile foo IP profile : foo IP address : none Unnumbered interface : none Router : Directed Broadcast : Enabled ICMP Redirects : Disabled Access Route Addition : Enabled Network Address Translation: Enabled, domain inside Source-Address Validation : Enabled Ignore DF Bit : Disabled Administrative MTU : 0 Auto Detect : Disabled Auto Configure : Disabled Auto Detect : Disabled IP FlowStats : Enabled
Meaning
Table 1 lists the show ip profile command output fields.
Table 1: show ip profile Output Fields
Field Name | Field Description |
|---|---|
IP profile | Profile name |
IP address | IP address and subnet mask of the interface or none if the interface is unnumbered |
Unnumbered interface | Specifier for the unnumbered interface or none if the interface is numbered |
Router | Router name |
Directed Broadcast | Directed broadcast forwarding feature status: Enabled or disabled |
ICMP Redirects | ICMP redirect feature status: Enabled or disabled |
Access Route Addition | Access route feature status: Enabled or disabled |
Network Address Translation | Enable or disable; domain location (inside or outside) |
Source-Address Validation | Source address validation feature status: Enabled or disabled |
Ignore DF Bit | Ignoring DF bit usage: Enabled or disabled |
Administrative MTU | MTU size |
Auto Detect | Router automatically detects packets that do not match any entries in the demultiplexer table; enabled or disabled |
Auto Configure | Dynamic creation of subscriber interfaces on a primary IP interface; enabled or disabled |
IP FlowStats | Enabled or disabled |
