Technical Documentation
New
Monitoring Detailed Information about the Current Encapsulation Type Lockout Condition for PPPoE Clients
Purpose
Display detailed information about the current encapsulation type lockout condition for each PPPoE client associated with a dynamic PPPoE subinterface column on a static PPPoE major interface.
Action
To display detailed information about the current encapsulation type lockout condition for each PPPoE client associated with a dynamic PPPoE subinterface column on a static PPPoE major interface:
host1#show pppoe interface atm 12/1/1.1.1 lockout-time PPPoE interface atm 12/1/1.1 Lockout Configuration (seconds): Min 90, Max 120 Total clients in active lockout: 1 Total clients in lockout grace period: 0 Client Address Current Elapsed Next -------------- ------- ------- ---- 0090.1a42.527c 120 30 120 0090.1a42.527c 0 0 90
Meaning
Table 1 lists the show pppoe interface lockout-time command output fields.
Table 1: show pppoe interface lockout-time Output Fields
Field Name | Field Description |
|---|---|
PPPoE interface | Specifier for the PPPoE interface |
Lockout Configuration (seconds) | Encapsulation type lockout settings for the PPPoE client associated with the dynamic PPPoE subinterface column:
|
Client Address | Source MAC address of the PPPoE client Note: Because PPPoE sessions that contain the IWF-Session DSL Forum VSA (26-154) use the same source MAC address of the DSLAM for all subscriber connections, multiple entries are displayed in the Client Address field for the same MAC address if multiple IWF sessions contain the same MAC address. |
Current | Current lockout time, in seconds; displays 0 (zero) if the PPPoE client is not undergoing lockout |
Elapsed | Time elapsed into the lockout time, in seconds; displays 0 (zero) if the PPPoE client is not undergoing lockout |
Next | Lockout time that the router uses for the next lockout event, in seconds |
