Technical Documentation
New
Setting the Baseline for VPLS Statistics
You can use the following baseline commands to set a statistics baseline for a VPLS instance, for a network interface associated with a VPLS instance, or for the VPLS virtual core interface associated with a VPLS instance. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Use the delta keyword with the show bridge commands display baselined statistics.
Tasks to set a baseline for VPLS statistics are:
Setting a Baseline for a VPLS Instance
To set a statistics baseline for a VPLS instance:
- Issue the baseline bridge command.host1#baseline bridge vplsA
Setting a Baseline for a Network Interface associated with a VPLS Instance
To set a statistics baseline for the VPLS network interface:
- Issue the baseline bridge interface command.host1#baseline bridge interface gigabitEthernet 4/1
Setting a Baseline for the VPLS Virtual Core Interface associated with a VPLS Instance
To set a statistics baseline for the VPLS virtual core interface:
- Issue the baseline bridge interface vpls command.host1#baseline bridge interface vpls vplsA
Published: 2012-07-02
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
