Creating Parameter Instances

Creating a Global Parameter Instance

• Create a parameter instance in Global Configuration mode.
  host1(config)#qos-parameter max-subscriber-bandwidth 6000000

Creating a Parameter Instance for an Interface

1. Specify an interface.
   host1(config)#interface atm 11/0.1 host1(config)#interface gigabitEthernet 2/0
2. Specify the parameter name and the value.
   host1(config-subif)#qos-parameter max-subscriber-bandwidth 6000000

Creating a Parameter Instance for an ATM VP

Use this procedure to attach a parameter instance to a VP on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.

1. Configure the ATM VP.
   host1(config)#interface atm 2/0 host1(config-if)#atm vp-tunnel 4
2. Do either of the following:
   • Attach the parameter instance to an ATM VP on the interface.
     host1(config-if)#atm-vp 4 qos-parameter max-subscriber-bandwidth 375000
   • Attach the parameter instance and associate with the QoS profile.
     host1(config-if)#atm-vp 4 qos-profile video qos-parameter max-subscriber-bandwidth 375000

Creating a Parameter Instance for an S-VLAN

Use this procedure to attach a parameter instance to a specified S-VLAN ID on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.

1. Specify the Ethernet interface and create the VLAN.
   host1(config)#interface gigabitEthernet 3/0 host1(config-if)#encapsulation vlan host1(config-if)#interface gigabitEthernet 3/0.1
2. Specify the S-VLAN ID.
   host1(config-if)#svlan id 1 202
3. Attach the parameter instance to an S-VLAN ID on the interface.
   host1(config-if)#svlan 202 qos-parameter max-subscriber-bandwidth 6000000