Creating Policy Lists for Frame Relay

The following example creates a Frame Relay policy that on egress marks the DE bit to 1, and on ingress colors frames with a DE bit of 1 as red.

1. Create the policy list used to mark egress traffic, then create the classifier group for packets conforming to CLACL frMatchDeSet. Add a rule that marks the DE bit as 1.
   host1(config)#frame-relay policy-list frOutputPolicy host1(config-policy-list)#classifier-group frMatchDeSet host1(config-policy-list-classifier-group)#mark-de 1 host1(config-policy-list-classifier-group)#exit host1(config-policy-list)#exit
2. Create the policy list used for the ingress traffic. and create the classifier group conforming to CLACL frMatchDeSet. Add a rule that colors the ingress traffic.
   host1(config)#frame-relay policy-list frInputPolicy host1(config-policy-list)#classifier-group frGroupA host1(config-policy-list-classifier-group)#color red host1(config-policy-list-classifier-group)#exit host1(config-policy-list)#exit
3. Apply the policy lists.
   host1(config)#interface serial 5/0:1/1.1 host1(config-subif)#frame-relay policy output frOutputPolicy statistics enabled host1(config-subif)#ip address 10.0.0.1 255.255.255.0 host1(config-subif)#exit host1(config)#interface serial 5/1:1/1.1 host1(config-subif)#frame-relay policy input frInputPolicy statistics enabled host1(config-subif)#exit
4. Display interface information to view the applied policies.

   host1#show frame-relay subinterface 

   Frame relay sub-interface SERIAL5/0:1/1.1, status is up
   Number of sub-interface down transitions is 0
   Time since last status change 03:04:59
   No baseline has been set
     In bytes: 660                    Out bytes: 660                 
     In frames: 5                     Out frames: 5                   
     In errors: 0                     Out errors: 0                   
     In discards: 0                   Out discards: 0                   
     In unknown protos: 0                   
   Frame relay policy output frOutputPolicy
     classifier-group frGroupA entry 1
        5 packets, 640 bytes 
        mark-de 1       
   Frame relay sub-interface SERIAL5/1:1/1.1, status is up
   Number of sub-interface down transitions is 0
   Time since last status change 03:05:09
   No baseline has been set
     In bytes: 660                    Out bytes: 660                 
     In frames: 5                     Out frames: 5                   
     In errors: 0                     Out errors: 0                   
     In discards: 0                   Out discards: 0                   
     In unknown protos: 0                   
   Frame relay policy input frInputPolicy
     classifier-group frMatchDeSet entry 1
        5 packets, 660 bytes
        color red

5. Display the classifier list.

   host1#show classifier-list detailed
    
   

                            Classifier Control List Table
                            ---------- ------- ---- -----
   Frame relay Classifier Control List frMatchDeSet
      Reference count:      1
      Entry count:          1

      Classifier-List frMatchDeSet Entry 1
         DE Bit:                     1

6. Display the policy lists.

   host1#show policy-list
   

                                     Policy Table
                                     ------ -----

   Frame relay Policy frOutputPolicy
      Administrative state: enable
      Reference count:      0
      Classifier control list: frMatchDeSet, precedence 100
         mark-de 1

   Frame relay Policy frInputPolicy
      Administrative state: enable
      Reference count:      0
      Classifier control list: frGroupA, precedence 100
        color red