To configure SNMP secure traps support, perform the following tasks on your E Series router:
The following example illustrates the procedure to configure SNMP secure packet mirroring traps support:
Enabled Categories: CliSecurity, PacketMirror, Sonet
SNMP authentication failure trap is disabled
Trap Source: FastEthernet 6/0, Trap Source Address:192.168.120.78
Trap Proxy: enabled
Global Trap Severity Level: 6 - informational
Address Security String Ver Port Trap Categories
--------------- -------------------------------- --- ----- ----------------
192.168.1.1 host1 v1 162 Cli
192.168.57.103 fredMirrorUser v3 162 CliPacketMirror
192.168.57.162 host2 v3 162 Sonet
Address TrapSeverityFilter Ping Maximum Queue Queue Full
TimeOut QueueSize DrainRate discrd methd
--------------- ------------------ ------- --------- --------- -------------
192.168.1.1 5 - notice 1 32 0 dropLastIn
192.168.57.103 5 - notice 1 32 0 dropLastIn
192.168.57.162 2 - critical 1 32 0 dropLastIn
See Configuring SNMP in JunosE System Basics Configuration Guide for information about JunosE Software SNMP support.