Enabling IP Source Address Validation Traps

You can enable the generation of traps for source address validation failure using the ip sa-validate trap-enable command.

You can specify a VRF context for which you want to enable trap validation for source address validation.

Note: To fully enable source address validation traps, you must also enable the IP trap category with the snmp-server trap enable command. See JunosE System Basics Configuration Guide for more information.

To enable the generation of traps for source address validation failure on the router:

• Issue the ip sa-validate trap-enable command in Global Configuration mode.
  host1(config)#ip sa-validate trap-enable

  Use the no version to disable the generation of source address validation failure traps on the router.