subscriber

Syntax

subscriber { bridgedEthernet | ip } { user | user-prefix } userName
domain domainName [ { password | password-prefix } password ]
[ no-authenticate ]

no subscriber { bridgedEthernet | ip }

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Configures a local subscriber (when one cannot be obtained externally, as in PPP) on the E Series router to support authentication and configuration from the RADIUS server. The no version negates the command.

Note: If your router is running stateful SRP switchover (high availability), the use of this command to configure RADIUS authentication for subscribers on dynamic bridged Ethernet interfaces might suspend stateful SRP switchover on the router or prevent stateful SRP switchover from becoming active. You must use the subscriber management application to bypass this limitation.

Options

• bridgedEthernet—Specifies bridgedEthernet as the upper interface type
• ip—Specifies IP as the upper interface type
• user—Employs the username as specified
• user-prefix—Appends the interface physical location to the username. The router automatically postpends the physical location of the user to the username string. The username format is userName.slot.port.vpi.vci. The resulting username string is then used to authenticate with the RADIUS server.
• userName—RADIUS username
• domainName—Domain name
• password—Employs the password as specified
• password-prefix—Appends the interface physical location to the password. The router automatically postpends the physical location of the user to the password string. The password format is password.slot.port.vpi.vci. The resulting password string is then used to authenticate with the RADIUS server.
• password—RADIUS password
• no-authenticate—Disables authentication

Mode

Interface Configuration, Subinterface Configuration