show configuration

Syntax

show configuration [ interface interfaceType interfaceSpecifier ] |
[ category categoryName [ categoryName ]* ] [ virtual-router routerName ]
[ [ exclude-category interface interfaceType ]* ] [ include-defaults ] [ filter ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Displays the current (running) configuration of the router, a specified virtual router, a specified interface, or a specified category of router settings. You can create a configuration script from this output by saving it as a file with the .scr extension. This command was formerly documented as show config; that abbreviation is still supported.

This command provides configuration information based on the privilege level of the session (user). The output does not display any configuration data for commands that have privilege levels higher than that of the session. For example, if the session is enabled at level 5, issuing this command displays only output for commands at level 5 and below.

Options

• interfaceType—Interface type; see Interface Types and Specifiers
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• categoryName—Name of the category or subcategory of router settings; first categoryName variable in the syntax represents the category; repeated categoryName variables represent subcategories of the category
• routerName—Name of the virtual router
• exclude-category—Excludes information associated with a particular type of interface
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line
• include-defaults—Includes commands that set default values for various parameters
• filter—See Filtering show Commands

Mode

Privileged Exec