protocol rate

Syntax

protocol protocolValue rate rateValue

no protocol protocolValue rate

Release Information

Command introduced in JunosE Release 8.1.0.

Description

Sets the maximum rate for the specified protocol. The rate limit applies to all packets of the protocol for interfaces belonging to the DoS protection group. A particular protocol can be up to the sum of the four rates configured, depending on the DoS group attached to an interface. Use a maximum rate of 0 for protocols that are not used. The actual rate never exceeds the maximum rate, but can be less than the configured maximum rate due to the weighting of the protocols within a DoS protection group and the use of multiple DoS protection groups. The no version sets the rate to the value of the associated preconfigured protocol.

Options

• protocolValue—Name of the protocol
• rateValue—Packets per second per line card, in the range 64–65335

Mode

DoS Protection Group Configuration