ip share-interface

Syntax

ip share-interface interfaceType interfaceSpecifier

no ip share-interface

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Specifies the layer 2 interface that an IP interface will share in the current virtual router. The command fails if the layer 2 interface does not yet exist.

If you issue this command on a shared IP interface, you cannot issue the ip share-nexthop command for the interface. After creating the shared IP interface, you can configure it as you do any other IP interface. The shared interface is operationally up when the layer 2 interface is operationally up and IP is properly configured. You can create operational shared IP interfaces in the absence of a primary IP interface.

The no version removes the association between the layer 2 interface and the shared IP interface. You can delete shared and primary IP interfaces independently

Options

• interfaceType—Interface type; see Interface Types and Specifiers
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers

Mode

Interface Configuration