ip igmp query-max-response-time

Syntax

ip igmp query-max-response-time tenthsOfaSecond

no ip igmp query-max-response-time

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Specifies the period in tenths of a second during which the host is expected to respond to an IGMP query. IGMP version 2 includes this value in IGMP query messages sent out on the interface. You cannot set this value on interfaces running IGMP version 1. The no version restores the default value, 100 tenths of a second (10 seconds).

Note: Use the IGMP-Max-Resp-Time RADIUS attribute (VSA 26-96) in RADIUS Access-Accept messages as an alternative method of configuring this value. The RADIUS setting takes precedence over a CLI setting.

Options

• tenthsOfaSecond—Time interval between receipt of an IGMP query and the response; in the range 1–25 tenths of a second for IGMPv2 and 1–31744 tenths of a second for IGMPv3. Using a lower value enables members to join and leave groups more quickly.

Mode

Interface Configuration, Profile Configuration