interface atm

Syntax

[ no ] interface atm interfaceSpecifier [ multipoint | point-to-point ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Configures an ATM interface or subinterface type. The no version removes the interface or subinterface.

Note: On the OC3-2 GE APS I/O module, you can configure only OC3/STM1 ATM interfaces in ports 0 and 1. Port 2 is reserved for a Gigabit Ethernet interface.

Options

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• multipoint—Specifies an NBMA subinterface
• point-to-point—Specifies an ATM interface or subinterface; default

Mode

Global Configuration, Interface Configuration