frame-relay keepalive

Syntax

frame-relay keepalive [ seconds ]

no frame-relay keepalive

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Enables the LMI mechanism for serial lines using Frame Relay encapsulation. The no version disables this capability. The keepalive command is similar to the frame-relay lmi-t391dte command.

Options

• seconds—Number in the range 5–30; default value is 10 seconds; defines the keepalive interval; the interval must be set, and the value on the DTE should be less than the value set on the DCE

Mode

Interface Configuration