enable

Syntax

To access Privileged Exec mode:

enable [ level ]

To enable event or trigger configuration:

[ no ] enable

Release Information

Command introduced before JunosE Release 7.1.0.

Description

From User Exec mode, enters Privileged Exec mode at the specified privilege level. There is no no version for this use.

From SNMP Event Configuration or SNMP Trigger Configuration modes, enables the configuration for the event or trigger, respectively. The no version disables the event or trigger.

Options

• level—level at which you want to access the Privilege Exec mode; default value is 10; commands generally fall into one of the following security/privilege levels:
  • 0—allows the user to execute the help, enable, disable, and exit commands
  • 1—Allows the user to execute commands in User Exec mode plus commands at level 0
  • 5—Allows the user to execute Privileged Exec show commands plus the commands at levels 1 and 0
  • 10—Allows the user to execute all commands except support commands, which may be provided by Juniper Networks Customer Service, or the ability to assign privileges to commands
  • 15—Allows the user to execute support commands and assign privileges to commands

Mode

SNMP Event Configuration, SNMP Trigger Configuration, User Exec