debug ipv6 pim

Syntax

debug ipv6 pim
{ pimLog [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] |
switchState groupAddress sourceAddress |
dense-mode { on | off } |
sparse-mode { on | off | sg-state [ group groupAddress
[ source sourceAddress ] | rp rpAddress ] [ count ] } }

no debug ipv6 pim pimLog

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Shows information about the selected variable. The no version disables the display.

Options

• pimLog—PIM log of interest; one of the following options:
  • autoRp-rcvd—Auto-RP packets received
  • autoRP-sent—Auto-RP packets sent
  • engineering—PIM engineering
  • hellos-rcvd—PIM hello messages received
  • hellos-sent—PIM hello messages sent
  • packets—PIM packets received and sent
  • packets-rcvd—PIM packets received
  • packets-sent—PIM packets sent
• severity—Specifies the minimum severity of the log messages displayed for the selected category; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:
  • emergency or 0—System unusable
  • alert or 1—Immediate action needed
  • critical or 2—Critical condition exists
  • error or 3—Error condition
  • warning or 4—Warning condition
  • notice or 5—Normal but significant condition
  • info or 6—Informational message
  • debug or 7—Debug message
• verbosityLevel—Verbosity of the log category's messages; can be any of the following:
  • low—Terse
  • medium—Moderate detail
  • high—Verbose
• switchState—Switches from one type of tree to another
  • rpt-switch—Switch from a shortest-path tree to a shared path tree
  • spt-switch—Switch from a shared-path tree to a shortest path tree
• groupAddress—IPv6 address of the multicast group
• sourceAddress—IPv6 address of the multicast source
• on—Turns on the specified PIM mode on all virtual routers
• off—Turns off the specified PIM mode on all virtual routers
• sg-state—Displays information about the relationship between a source, multicast group, and RP router
• rp—Displays information about the relationships between sources, groups, and the specified RP router
• rpAddress—Address of the RP router
• count—Displays one of the following
  • (with no optional keywords) number of relationships between a source, multicast group, and RP router
  • (with the group keyword) number of sources associated with the multicast group for PIM sparse mode
  • (with the source and group keywords) number of source-group pairs for PIM sparse mode
  • (with the rp keyword) number of source-group pairs associated with the RP router for PIM sparse mode

Mode

Privileged Exec