debug ip mbgp

Syntax

debug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ]
[ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ]
[ route-map mapName ] [ severity { severityValue | severityNumber } ]
[ verbosity verbosityLevel ] [ secondary ]

no debug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ]
[ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ]
[ route-map mapName ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Shows information about the selected variable. The no version disables the display.

Options

• in—Displays information for inbound events
• out—Displays information for outbound events
• peerAddress—IP address of BGP peer for which information is displayed
• peerAddressMask—Network mask of BGP peer for which information is displayed
• bgpLog—BGP log of interest; one of the following options:
  • dampening—BGP dampening event; route is suppressed or no longer suppressed by route-flap dampening
  • events—BGP finite state machine events and transitions
  • keepalives—BGP keepalive message events
  • next-hops—BGP next hop events
  • updates—BGP routing table update events
• routerName—Name of the virtual router that owns the BGP router for which information is being displayed
• filteringRouterName—Name of the virtual router that owns the access class and route map parameters
• accessClassName—Name of an access list to filter output
• mapName —Name of a route map to filter output
• severity—Specifies the minimum severity of the log messages displayed for the selected category; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:
  • emergency or 0—System unusable
  • alert or 1—Immediate action needed
  • critical or 2—Critical condition exists
  • error or 3—Error condition
  • warning or 4—Warning condition
  • notice or 5—Normal but significant condition
  • info or 6—Informational message
  • debug or 7—Debug message
• verbosityLevel—Verbosity of the log category's messages; can be any of the following:
  • low—Terse
  • medium—Moderate detail
  • high—Verbose
• secondary—Indicates that the specified filter conditions for the log are imposed in addition to any that were previously specified; if omitted, the specified filter conditions replace any that were previously specified

Mode

Privileged Exec