bulkstats collector

Syntax

bulkstats collector collectorIndex
[ collect-mode { auto-xfer | on-file-full | manual-xfer } | description descrip |
interval intrvl | max-size maxSize | primary-receiver primRecvIndex |
secondary-receiver secRecvIndex | single-interval ]

no bulkstats collector collectorIndex [ collect-mode | description | interval | max-size
|primary-receiver | secondary-receiver | single-interval ]*

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Creates and configures a collector of bulk statistical data to collect MIB-2 ifTable MIB objects. You can configure up to six collectors. The no version restores the default value for specified options; if no options are specified, the no version deletes the collector.

Options

• collectorIndex—Number in the range 1–65535 that identifies the particular data collector
• collect-mode—Specifies one of the following collection modes:
  • auto-xfer—Agent automatically transfers file when interval expires
  • on-file-full—Agent automatically transfers file when it is full
  • manual-xfer—Router or user-initiated transfers; default collection mode
• descrip—Descriptive information to insert into the bulkstats file
• intrvl—Time period in the range 300– 86400 seconds for which the collector transfers data from the router to the receivers; default interval is 360 seconds
• maxSize—Maximum size of the file in the range 10240–20971520 bytes; default file size is 2,621,440 bytes
• primRecvIndex—Number in the range 1–65535 that identifies the primary receiver to which the router transfers the data; by default the primary receiver is cleared
• secRecvIndex—Number in the range 1–65535 that identifies the secondary (backup) receiver to which the router transfers the data; by default the secondary receiver is cleared
• single-interval—Specifies that the collector retrieves the bulk statistics data only once; by default, the collector receives the data periodically
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line

Mode

Global Configuration