bridge vpls site-range

Syntax

bridge vplsName vpls site-range siteRange

no bridge vplsName vpls site-range

Release Information

Command introduced in JunosE Release 7.1.0.

Description

Configures the maximum number of customer sites that can participate in the specified VPLS domain that uses BGP as the signaling protocol. In a VPLS configuration, each customer site is represented by a customer edge (CE) device located at the edge of the customer's network. The router (VPLS edge device) communicates with the customer site by means of a bridge network interface connection to the CE device. The no version restores the default site range, 1.

The bridge vpls site-range command is not valid for a VPLS instance that uses LDP as the signaling protocol. To configure a VPLS instance with LDP signaling, use the mpls ldp vpls vpls-id command and the mpls ldp vpls neighbor command.

Note: The bridge vpls site-range command is available for a VPLS instance only after you issue the bridge vpls transport-virtual-router command, which creates the VPLS instance and configures the transport virtual router.

Options

• vplsName—Name of a VPLS instance created with the bridge vpls transport-virtual-router command
• siteRange—Maximum number of sites that can participate in the VPLS domain, in the range 1–65534; default value is 1

Mode

Global Configuration