avp

Syntax

avp avpType action

no avp avpType

Release Information

Command introduced in JunosE Release 7.2.0.

Description

Configures the L2TP tunnel switching behavior for a specified L2TP AVP type. The no version restores the default L2TP tunnel switching behavior for AVPs of the specified type.

Options

• avpType—One of the following L2TP AVPs
  • bearer-type—L2TP Bearer Type AVP 18; by default, the router regenerates this AVP at the outbound LAC session, based on the local policy that is in effect
  • calling-number—L2TP Calling Number AVP 22; by default, the router regenerates this AVP at the outbound LAC session, based on the local policy that is in effect
  • cisco-nas-port—Cisco NAS Port Info AVP 100; by default, the router drops this AVP
• action—One of the following actions that characterize the tunnel switching behavior; currently, only the relay action is supported
  • relay—Causes the router to preserve the value of an incoming AVP of the specified type when packets are switched between an inbound LNS session and an outbound LAC session

Mode

L2TP Tunnel Switch Profile Configuration