address retransmit-interval

Syntax

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } retransmit-interval retransInterval

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Specifies the time between LSA retransmissions for the interface when an acknowledgment for the LSA is not received. The no version restores the default value.

Note: You must issue the address area command before issuing this command.

Options

• ipAddress—OSPF interface address previously specified with the address command
• unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
  • interfaceType—Interface type; see Interface Types and Specifiers
  • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• retransInterval—Number in the range 0–3600 seconds; default value is 5 seconds

Mode

Router Configuration