address hello-interval

Syntax

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
hello-interval helloInterval

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Specifies the interval between hello packets that the router sends on the interface. The no version resets the hello interval to its default.

Note: You must issue the address area command before issuing this command.

Options

• ipAddress—OSPF interface address previously specified with the address command
• unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
  • interfaceType—Interface type; see Interface Types and Specifiers
  • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• helloInterval—Number in the range 1–65535 seconds; default value is 10 seconds

Mode

Router Configuration